Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Reltek BONDiT™ B-4811 Adhesive, Sealant & Coating System Key Properties: Semi-rigid, high strength.A filled version of B-481 to further increase chemical resistance and electrical properties and to lower shrinkage.Ease of use.Applications: Encapsulate sen.. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Permabond LM012 Anaerobic Threadsealant Permabond® LM012 is an unfilled, medium viscosity anaerobic adhesive. Its major benefit as related to other pipe sealants is that it is an unfilled resin that is compatible with hydraulic fluids. I.. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Dielectric Polymers NT-2802SW Functional Splice Tape
(discontinued **) Crosslinked silicone adhesive with silicone easy release coated polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing of roll label stock .. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Dielectric Polymers NT-2811 Ultra Tack Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing of silicone coated paper and film at zero wet out.. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Dielectric Polymers NT-5521-2 Photo Processing Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing photographic film to leader card during film proc.. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Ethylene Propylene Rubber (EPM, EPDM) Satisfactory compatibility with fireproof hydraulic fluids, ketones, hot and cold water, alkalis, and ozone/strong oxidizing chemicals. Unsatisfactory compatibility with most oils, gasoline, kerosen.. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | dry |
ITW Devcon Metal Repair Ceramic Repair Putty, Dark Blue Information provided by ITW Devcon |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | |
Henkel Hysol EA 9258.1 Primer Waterborne, corrosion-inhibiting primer, designed to provide enhanced toughness and high temperature performance where continuous exposures up to 350°F / 177°C are required. Meets SCAQMD Rule .. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Saint-Gobain CHR® 2829-5(R) Acrylic Adhesive Zone Tape Specification Notes: UL Guide OANZ2, File E51201, MIL-T-47012, UL510. All data based on a 0.0047 inch test sample.Information provided by Saint Gobain Performance Products. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Saint-Gobain CHR® M66 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Saint-Gobain CHR® M803 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Saint-Gobain CHR® M98 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
Trelleborg AEM Syntac® 351 Syntactic Foam Syntac® 351 is a castable syntactic composite material of epoxy resin and high performance hollow glass microspheres designed specifically for molding thermoforming plugs and other associated tooli.. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | High strength retained |
Hexcel® HexWeb® HRP - 3/8 - 8.0 Fiberglass/Phenolic Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb HRP is a glass fabric reinforced honeycomb in which a heat-resistant phenolic resin is used both for initial and final impregnations. This prod.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | |
Trelleborg Emerson & Cuming Syntac® 350 Composite Materials Syntactic Foam Syntac 350 foam is a rigid, high strength composite of epoxy resin and microscopic hollow glass microspheres designed specifically for fabricating thermoforming plugs and other associated tooling. .. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | 5000 hours Thermal Index; IEC 60216/ISO 527-1/-2 |
DSM Stanyl® TW271F6J10 (PA46+PTFE)-GF30 30% Glass Reinforced, Heat Stabilized, Wear and Friction Modified |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
CMT Materials HYTAC® B1X High Durability Thermoplastic Syntactic HYTAC-B1X is the first plug assist material to combine the toughness of an engineered thermoplastic with the low thermal conductivity of syntactic foam. Plug assist made from HYTAC-B1X will resist .. |
|||
Maximum Service Temperature, Air | 177 °C | 350 °F | |
CMT Materials HYTAC® XTL Tough Thermoplastic Syntactic Foam HYTAC®-XTL was developed to offer an improved surface quality after machining when compared to our popular HYTAC-B1X. This is particularly important when working with sticky or transparent plastic.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | Short term |
3M 9502 Adhesive Transfer Tapes with Adhesive 220 3M™ Adhesive Transfer Tapes with 3M™ Industrial Acrylic Adhesive 220 is an economical choice for general industrial bonding of metals, painted metals and high surface energy plastics.Information p.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | Short term |
3M 9505 Adhesive Transfer Tapes with Adhesive 220 3M™ Adhesive Transfer Tapes with 3M™ Industrial Acrylic Adhesive 220 is an economical choice for general industrial bonding of metals, painted metals and high surface energy plastics.Information p.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | |
3M Scotch® 214 High-Temperature Masking Tape Scotch® High Temperature Masking Tape 214 is good for one hour at 350°F (177°C) on most surfaces. The adhesive is sulfur-free which makes it one of the few tapes that can be used on copper, silve.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | Long term |
3M 9085UV Ultra High Temperature 100 HT Adhesive Transfer Tape 3M™ Ultra High Temperature 100HT Adhesive Transfer Tapes 9082 and 9085 utilize a high performance and low outgassing adhesive system having excellent heat resistance in high temperature environment.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | Short term |
3M 9555 Adhesive Transfer Tapes with Adhesive 220 3M™ Adhesive Transfer Tapes with 3M™ Industrial Acrylic Adhesive 220 is an economical choice for general industrial bonding of metals, painted metals and high surface energy plastics.Information p.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | Short term |
3M 9628B Double Coated Tape with Quick Bonding Adhesive 360 3M™ Double Coated Tapes with 3M™ Quick Bonding Adhesive 360 provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints... |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | |
Henkel Hysol MA 560 Core Splice Adhesive A modified epoxy, low density (24-25 psf) foaming film adhesive capable of expanding 2.5 times the original thickness. Cures at 250°F / 121°C or 350°F / 177°C and is designed for service at temp.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | |
Henkel Hysol MA 562 Core Splice Adhesive General-purpose 250°F / 121°C or 350°F / 177°C curing foaming adhesive. Designed for service temperatures from -67°F / -55°C to 350°F / 177°C. Medium tack, nonmetallic, low exotherm properti.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | See Note 2. |
ChevronTexaco Crater® 5X Texaco Crater lubricants delivers value through:Low environmental impact — Contains a carrier solvent that is a non-ozone depleting diluent.Good water resistance — Strong resistance to water washo.. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | |
Henkel SynCore 9872.1 Syntactic Film Toughened, low density syntactic core, superior moisture resistance, co-curable with a wide variety of 350°F / 177°C curing epoxy prepregs. |
|||
Maximum Service Temperature, Air | 177 °C | 351 °F | |
Henkel SynCore HC 9875 Syntactic Film High crush strength, low density syntactic core material, co-curable with a variety of 350°F / 177°C curing epoxy prepregs. |