Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 180 °C @Time <=86400 sec |
356 °F @Time <=24.0 hour |
|
Murtfeldt Murylon® A Nylon 66 This material combines the excellent properties of the Murylon® range with additional high tensile and compressive strength, increased wear resistance, and a lower level of moisture absorption than.. |
|||
Maximum Service Temperature, Air | 180 °C @Time 7.20e+7 sec |
356 °F @Time 20000 hour |
IEC 60216/T1 |
Raschig Group EPOXIDUR® 3580 EP Epoxy Glass-fiber reinforced and mineral filled epoxy molding compound. Good mechanical strength, very good electrical isolation properties even with thin wall thicknesses and high temperatures. This prod.. |
|||
Maximum Service Temperature, Air | 180 °C @Time 7.20e+7 sec |
356 °F @Time 20000 hour |
IEC 60216/T1 |
Raschig Group EPOXIDUR® 3581 S ZC EP Epoxy Molding Compound Inorganically filled epoxy molding compound. Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures. Very good sealing connection on .. |
|||
Maximum Service Temperature, Air | 180 °C @Time 7.20e+7 sec |
356 °F @Time 20000 hour |
IEC 60216/T1 |
Raschig Group EPOXIDUR® 3581 T-1 EP Epoxy, Molded, Glass Fiber Filler Glass-fiber reinforced and inorganically filled epoxy molding compound. Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures. Very .. |
|||
Maximum Service Temperature, Air | 180 °C @Time 7.20e+7 sec |
356 °F @Time 20000 hour |
IEC 60216/T1 |
Raschig Group RALUPOL® 804 UP Polyester Glass-fiber reinforced polyester molding compound. Low molding shrinkage and post-shrinkage, good electrical values, good mechanical strength. This product meets the allowed upper limits for heavy m.. |