Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 12.2 µm/m-°C @Temperature 204 °C |
6.80 µin/in-°F @Temperature 400 °F |
x-ply; 8HS form; ASTM D696 |
Park Electrochemical Nelcote® F-555 Phenolic Prepreg, ENKA Reinforced Nelcote® F-555 is a carbon-filled MIL-R-9299 phenolic resin optimized for coating Carbonized Rayon cloth. F-555 is used extensively in the manufacture of high temperature rocket nozzles, heat shiel.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 204 °C |
6.80 µin/in-°F @Temperature 400 °F |
x-ply; 8HS form; ASTM D696 |
Park Electrochemical Nelcote® F-555 Phenolic Prepreg, NARC/CYDSA Reinforced Nelcote® F-555 is a carbon-filled MIL-R-9299 phenolic resin optimized for coating Carbonized Rayon cloth. F-555 is used extensively in the manufacture of high temperature rocket nozzles, heat shiel.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 93.3 °C |
6.80 µin/in-°F @Temperature 70.0 - 200 °F |
|
Schmolz + Bickenbach P-20 High Hard Plastic Mold Steel Description: P-20 High Hard is an improved pre-hardened mold steel that has been specially designed for large plastic molds; Material is forged on a 5000 ton press assuring maximum deformation durin.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 93.3 °C |
6.80 µin/in-°F @Temperature 70.0 - 200 °F |
|
Schmolz + Bickenbach P-20 Modified Plastic Mold Steel Description: P-20 Modified is an improved pre-hardened mold steel that has been specially designed for large plastic molds; The material is forged on a 5000 ton press assuring maximum deformation du.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 20.0 - 499 °C |
6.80 µin/in-°F @Temperature 68.0 - 930 °F |
|
Schmolz + Bickenbach UgiPermâ„¢ 12FM Stainless Steel Bar Description: UgiPermâ„¢ 12FM is a 12% chrome ferritic stainless with improved magnetic properties designed for use in electro-injectors, valves and many other applications. The grade was develope.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 427 °C |
6.80 µin/in-°F @Temperature 70.0 - 800 °F |
|
Crucible Steel 161 Tool Steel, High Carbon H13 Crucible 161 is a high carbon modification of H13, intended for applications requiring higher hardness, compressive strength, wear resistance, or tempering resistance (hot hardness), at slightly low.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 0.000 - 649 °C |
6.80 µin/in-°F @Temperature 32.0 - 1200 °F |
|
Crucible Steel 420 and 420F Chromium Steel Crucible 416 Plus is a hardenable chromium steel which is the general purpose cutlery grade. This grade is magnetic in all conditions. Information provided by Crucible Specialty Metals. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 427 °C |
6.80 µin/in-°F @Temperature 70.0 - 800 °F |
|
Crucible Steel CPM® Nu-Die® EZ Tool Steel CRUCIBLE CPM Nu-Die EZ is a new, patented die and mold steel designed for service as die casting dies and plastic injection molds. It is supplied in the prehardened condition, and is easily machined.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 427 °C |
6.80 µin/in-°F @Temperature 70.0 - 800 °F |
|
Crucible Steel PEERLESS A Tool Steel, AISI H21 Peerless A is designed for tools which will run hot, at operating temperatures between about 600F and 1100F. The tools should not be water cooled in service, due to a high risk of thermal shock. Pee.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 20.0 - 200 °C |
6.80 µin/in-°F @Temperature 68.0 - 392 °F |
low temp. tempering, hardened to 62 HRC |
Bohler-Uddeholm AISI D2 Cold Work Tool Steel AISI D2 is a high-carbon, high-chromium tool steel alloyed with molybdenum and vanadiumAISI AD2 is characterized by: High wear resistance High compressive strength Good through-hardening properties.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 399 °C |
6.80 µin/in-°F @Temperature 750 °F |
hardened to 46 HRC |
Bohler-Uddeholm UDDEHOLM CORRAX® Precipitation Hardening Stainless Mold Steel A precipitation hardening stainless steel which offers excellent high corrosion resistance, excellent dimensional stability during hardening and good wear resistance. It can be used at its as-suppli.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 600.0 °C |
6.80 µin/in-°F @Temperature 1112 °F |
hardened and tempered |
Bohler-Uddeholm UDDEHOLM VANADIS 30 AISI M2 + Co SUPERCLEAN 3 Powder Metallurgical Cold Work Tool Steel Uddeholm Vanadis 30 is a Co high alloyed powder metallurgy high speed steel corresponding to AISI M3:2 + Co. The high compressive strength, 67 HRC, and good abrasive wear resistance makes Uddeholm V.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 204 - 427 °C |
6.80 µin/in-°F @Temperature 400 - 800 °F |
|
Crucible Steel PDCQ Premium Quality High Toughness H13 Steel Crucible PDCQ™ is a premium version of H13, manufactured to exceed die casting industry specifications. PDCQ has at least 10 ft. lbs room temperature transverse toughness. Its enhanced toughness pr.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 93.3 °C |
6.80 µin/in-°F @Temperature 70.0 - 200 °F |
|
Schmolz + Bickenbach Cryodur® 2312 (Brake Die) Cold Work Die Steel Description: Cryodur® 2312 is a pre-hardened single melt Extra Fine Structure (EFS) plastic mold steel and Re-sulphurized to improve machinabilityCharacteristics: Excellent machinability compared t.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 204 °C |
6.80 µin/in-°F @Temperature 70.0 - 400 °F |
|
Schmolz + Bickenbach Cryodur® 2357(S-7) Cold Work Die Steel Description: Cryodur 2357 is a shock resistant tool steel with excellent toughness and high strength; Suitable for cold and hot work applications up to 1000 °F; and Supplied in the annealed conditi.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 399 °C |
6.80 µin/in-°F @Temperature 70.0 - 750 °F |
|
Schmolz + Bickenbach Cryodur® 2379 (D-2) Cold Work Die Steel Description: Cryodur® 2379 is a high carbon, high chromium tool steel developed for high wear applications and Supplied in the annealed conditionCharacteristics: Excellent abrasive wear resistance;.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 93.3 °C |
6.80 µin/in-°F @Temperature 70.0 - 200 °F |
|
Schmolz + Bickenbach Formadur® 2311 Plastic Mold Steel Description: Formadur® 2311 is a pre-hardened plastic mold steelCharacteristics: Good texturing compared to Formadur®2312 and Good polishability compared to Formadur® 231Applications: Injection m.. |
|||
CTE, linear | 12.2 µm/m-°C @Temperature 21.1 - 93.3 °C |
6.80 µin/in-°F @Temperature 70.0 - 200 °F |
|
Schmolz + Bickenbach Formadur® 2312 (Ultra Holder) Plastic Mold Steel Description: Formadur® 2312 is a pre-hardened single melt Extra Fine Structure (EFS) plastic mold steel and Re-sulphurized to improve machinabilityCharacteristics: Excellent machinability compared .. |