Thermal Properties | Metric | English | Comments |
---|---|---|---|
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
Nye Lubricants 176F (SO) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
Nye Lubricants 748C (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
Nye Lubricants 749B (NG) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
Nye Lubricants 752 (NG) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
Nye Lubricants 787K (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | impact conditions and heavy loads not considered |
Omnia Plastica Akulon® PA 66.6 Akulon GX - Dry Copolymer of nylon with excellent mechanical features, it combines the good impact resistances of PA6 as well as the higher stiffness of PA66. For this reason it machines very well on automatic tool.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | impact conditions and heavy loads not considered |
Omnia Plastica PE 300 - Polyethylene 300 Molecular weight 300,000 polyethylene similar to the type 500 with higher rigidity and lower resistance to continuous shocks. The applications are similar to those of PE 500, being more commonly spe.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | impact conditions and heavy loads not considered (dry sample) |
Omnia Plastica Rilsan® PA6 GF - Akulon GF - at 50% RH Polyamide 6 reinforced with the addition of 30% glass fibre and graphite. The glass charge makes the material highly resistant to abrasion, compression and flexing. Akulon GF is particularly suitabl.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering C70M Chloroprene Rubber Chloroprene Rubber, 66-75 °IRHD. Formulated to meet British Standard BS2752 grade C70.Applications: A versatile rubber with good compression set properties, giving moderate resistance to petroleum.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Precision Polymer Engineering N50C Nitrile Rubber Nitrile Butadiene Rubber, 45-55 °IRHD. High acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. To meet British Gas Specification BGC/PS/LC6 Class B, approval ref.: 67/6.11.iv. M.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Precision Polymer Engineering N90B Nitrile Rubber General purpose, Nitrile Rubber, 85-95 °IRHD. Copolymer of acrylonitrile and butadiene. ASTM & ISO designation = NBR. ASTM D2000 line call-out: M4CH910, A25, B14, EF31, EO15, EO35, F16.Applications.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering N90E Nitrile Rubber High Nitrile Rubber, 85-95 °IRHD. High acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. ASTM designation = NBR. ISO designation = NBR. Aerospace Material Specification DTD5509.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Precision Polymer Engineering N90M Nitrile Rubber Nitrile Rubber, 85-95 °IRHD. Meets British Standard BS2751 BA90. Medium acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. ASTM designation = NBR. ISO designation = NBR.Applica.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Precision Polymer Engineering Z85L Hydrogenated NBR Compound Peroxide Cured, Hydrogenated Nitrile Rubber, 81-90 °IRHD. Low acrylonitrile content.Applications: Specially compounded for service in low-temperature applications. High strength and excellent chem.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Radici Heraflex® P 40D 21 I HF Modified Polypropylene Shore hardness: 40D (3s)Shiny surface, very flexible even at very low T°C (to -30°C), good resistance to weather conditions, very light and recyclableApplication examples: low price, boots interna.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering C60M Chloroprene Rubber Chloroprene Rubber, 56-65 °IRHD. Formulated to meet British Standard BS2752 grade C60.Applications: A versatile rubber with good compression set properties, giving moderate resistance to petroleum.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Radici Heraflex® P 40D 11 I HF 1530 Modified Polypropylene Shore hardness: 40D (3s)Shiny surface, very flexible even at very low T°C (to -30°C), good resistance to weather conditions, very light and recyclableApplication examples: hiding soft, winter foot.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Greene Tweed CHEMRAZ® 543 Perfluoroelastomer Chemraz® 543 is recommended for a wide variety of semiconductor equipment dry processing applications where seal reliability with minimal contamination is required. It offers excellent performan.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended Operating Temperature |
Unifrax Excelfrax® 200 VIP Vacuum Insulation Panel Excelfrax® 200 VIP is a Vaccum Insulation Panel (VIP) designed to provide insulation at temperatures between -300°F and +300°F. This thermal insulation provides extremely low thermal conductivit.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Gehman T100 |
Zeon Chemicals HyTemp® AR12 AR Super ACM Polyacrylate Elastomer Curesite is optimized for improved long-term heat and compression set resistance over traditional acrylates with good low-temperature properties. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Dow Corning MOLYKOTE® G 68 Semi-synthetic greaseInformation provided by Dow Corning |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Bond Laminates TEPEX® dynalite 102-RG600(x)/47% Roving Glass – PA 6 Consolidated Composite Laminate Within the TEPEX® composite laminate, Polyamide 6 is a resin known for its toughness, stiffness, abrasion resistance, heat and chemical resistances. Roving E-Glass fibers have an excellent impact .. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Bond Laminates TEPEX® dynalite 408-C200(2)-FG290(4)/45% Carbon – Filament Glass – TPU Consolidated Composite Laminate Within the TEPEX® composite laminate, TPU distinguishes itself from alternative resin systems by its specific physical properties. The TPU resin is tough which results in an excellent impact and f.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Service |
3M FM04190E White Polyester Label Products 3M™ White Polyester Label Products are durable, high performance materials that offer excellent thermal stability and moisture resistance. These polyester labels utilize 3M™ Adhesive P1480, which .. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Trelleborg B644 High Quality Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
Bostik 6344 Low Temperature EVA Glue Stick Bostik 6344 Low Temperature EVA Glue StickLong open time. Low temperature glue is safer to use. Bonds heat sensitive foams. Excellent bonds at lower temperatures. |
|||
Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
CENTROPLAST CENTROMID 6.6 Polyamide 6.6 This material has good hardness, wear resistance, abrasion strength and impact strength. It is used for bearing cages, sliding bearings and articulated joint blocks.Information provided by CENTROPL.. |