Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | >= 7.89 kN/m | >= 45.0 pli | ASTM D624 |
Parker Chomerics POLASTRIP® Metal EMI Gasket Description: POLASTRIP gasketing are composite EMI shielding and weather sealing materials. Either solid or sponge silicone may be specified as the weather seal. In POLASTRIP gasketing, EMI shieldin.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | ASTM D624 |
Parker Chomerics Tecknit Consil®-II 842 Molded Silver-Filled Silicone Elastomer Description: CONSIL-II is a molded silicone elastomer filled with silver-coated inert particles. It provides high electrical conductivity, broadband shielding and moisture sealing. CONSIL-II is desi.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | TD; ISO 6383-1 |
Victrex® APTIV® 1000-050 Polyetheretherketone (PEEK) Polymer Film, Semi-Crystalline APTIV PEEK 1000 series films are the unfilled semi-crystalline films made from VICTREX® PEEK polymer. The film provides a material solution for engineers in ultra-high performance applications.APTI.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Die B, Compound Property; ASTM D624 |
Arlon R36772R008 0.008" (0.203 mm) Fully Cured, Unsupported, Silicone Rubber with Fiberglass Substrate
( Design/Construction:Side 1: Fully Cured, Unsupported, Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material .. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Die C; ASTM D624 |
Mearthane Durethaneâ„¢ S DS-210A Solid Polyurethane Elastomer TDI backbone: ester.Summary: Durethane S is a solid urethane elastomer. Formulations are individually compounded and tested to meet OEM requirements for durometer, tensile strength, tear strength, .. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2275-2 Extruded PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Initial Tear Strength |
Saint-Gobain CHR® A662 Aluminum Foil Backing Acrylic Adhesive Pressure Sensitive Tape Description: Aluminum and copper foil tapes offer high conformability, conductivity, and reflectivity at elevated temperatures. Aluminum is available with a fiberglass laminate for applications requ.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Tensile Strength (Warp) |
Saint-Gobain Chemfab® 2 Porous PTFE-Coated Glass Description: Chemfab® Porous Series products are lightweight, highly porous materials commonly used as a release (non-stick) layer for composite curing, molding, and other processes that "off-gas.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2255-3 High Modulus PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Initial Tear Strength |
Saint-Gobain CHR® HM650 High Modulus PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | |
Dow Corning SILASTIC® LCS-755 SILICONE RUBBER 55 Durometer, translucent, low compression set, uncatalysed Silicone Rubber Base suitable for molding.Information provided by Dow Corning |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Die B, Silicone Property; ASTM D624 |
Arlon 66211A007 0.007" (0.178 mm) Uncured Silicone Rubber Monofilament Polyester Fabric Substrate Design/Construction: Interleave 1: Polyethylene Side 1: Uncured Silicone Rubber Substrate: Monofilament Polyester Fabric Side 2: Uncured Silicone RubberInterleave 2: Polyethylene This data represent.. |
|||
Tear Strength | >= 7.89 kN/m | >= 45.0 pli | ASTM D624 |
Parker Chomerics POLASHEET® Metal EMI Gasket Description: POLASHEET gasketing are composite EMI shielding and weather sealing materials. Either solid or sponge silicone may be specified as the weather seal. In POLASHEET gasketing individual mo.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | cured 15 mins @ 150°C |
ACC QSil 553 QSI Quantum Silicones Silicone Potting Material QSil 553 is a 100% silicone solids elastomer designed for electronic potting applications. The two-component system offers a flame retardant, thermally conductive, low modulus material that is readi.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Die C (graves), 20 in/min; ASTM D624 |
PolyOne Synprene® RT-3810M Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:High Performance Thermoplastic ElastomerNaturalApplications:Multi-PurposeFDA (Food Contact)Market:Consumer GoodsProcessing Method:Injection MoldingPolyOne First ChoiceDisclaimer.. |
|||
Tear Strength | 7.89 kN/m | 45.0 pli | Die C (graves), 20 in/min; ASTM D624 |
PolyOne Synprene® ST-6110 Thermoplastic Elastomer - SBC
(discontinued **) Synprene™ thermoplastic elastomers (TPEs) are compounds based on styrenic block copolymer (SBC) technology, and can be formulated to deliver extremely low hardness values not found in other elastom.. |