Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 35.9 kN/m | 205 pli | post cured- 2 hours at 177°C; Die B |
Multibase SILASTIC® C7-4550 CADOX TS-50S Dow-Corning Biomedical Grade ETR Elastomer Information provided by Multibase |
|||
Tear Strength | 35.9 kN/m | 205 pli | Die C, 510 mm/min; ASTM D624 |
PolyOne Elastamax™ XL-2065 Thermoplastic Polyolefin Elastomer (TPO (POE)) PolyOne's Elastamax™ XL thermoplastic olefins (TPOs) are based on pelletized blends of polyolefin resins and select elastomers such EPDM. These materials have been engineered to provide a balance o.. |
|||
Tear Strength | 35.9 kN/m | 205 pli | Die C |
TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane, 350ºF Cure Temperature MILLATHANE HT is a polyester millable polyurethane which has the ability to withstand elevated temperatures. Polyurethanes have been known for their excellent resistance to abrasion, impact, tear st.. |
|||
Tear Strength | 35.9 kN/m | 205 pli | 0.025" extruded film; ASTM D624 |
Huntsman IROGRAN® A 60 E 4902 TPU-Polyester Introduction: IROGRAN A 60 E 4902 is a soft, high performance polyester based thermoplastic polyurethane intended for extrusion and molding applications. IROGRAN A 60 E 4902 is part of the HUNTSMAN .. |
|||
Tear Strength | 35.9 kN/m | 205 pli | Die B, post cured- 4 hours at 177°C; ASTM D624 |
Multibase C6-135 Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tear Strength | 35.9 kN/m | 205 pli | Die C |
TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane, 350ºF Cure Temperature MILLATHANE HT is a polyester millable polyurethane which has the ability to withstand elevated temperatures. Polyurethanes have been known for their excellent resistance to abrasion, impact, tear st.. |
|||
Tear Strength | 35.9 kN/m | 205 pli | Trouser; ASTM D470 |
Lubrizol Estane® ETE 55DS3 Thermoplastic Polyurethane, Easy-to-Extrude Type: Estane® ETE 55DS3 is a 55D aromatic polyester-based thermoplastic polyurethane (TPU).Features: Hard TPU with wide extrusion processing window and melt stability, low temperature flexibility, .. |
|||
Tear Strength | 35.9 kN/m | 205 pli | Split; ASTM D470 |
Lubrizol Estane® 58144 Thermoplastic Polyurethane Type: Estane® 58144 is a 65D Polyether-type thermoplastic polyurethane (TPU) compound.Features: FDA (contact Lubrizol for details). Pre-drying: 2 hours at 104C (220F) in Dehumidifying Hopper Dryer.. |
|||
Tear Strength | 35.9 kN/m | 205 pli | |
Dow Corning SILASTIC® 99-595-HC LIQUID SILICONE RUBBER KIT 40 Durometer, 2-part, 1 to 1 mix, translucent Liquid Silicone Rubber.Information provided by Dow Corning |
|||
Tear Strength | 35.9 kN/m | 205 pli | Die C, Vulcanizate, Press cured, TC95 +3min at 160°C |
Dow Nordel® IP 4725P Dense Extrusion FormulationNordel® IP 4725P |
|||
Tear Strength | 35.9 kN/m | 205 pli | die B; ASTM D624 |
D-2103 Styrene-based Biomedical Elastomer |
|||
Tear Strength | 35.9 kN/m | 205 pli | Die C (graves), 20 in/min; ASTM D624 |
PolyOne Synprene® IT 62-001 Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:Over-Molding GradeNaturalTransparentUV StabilizedApplications:Multi-PurposeProcessing Method:Injection MoldingPolyOne First ChoiceInformation provided by PolyOne Corporation. |