Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Modulus | 1.07 GPa | 155 ksi | Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790 |
Network Polymers NPP 25-1002 Description: Copolymer PolypropyleneInformation provided by Network Polymers Inc. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790 |
Network Polymers NPP 50-0350 Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | ASTM D790 |
NOVA Chemicals Sclair® 2807 HDPE Injection Molding Resin Features: Excellent processability for applications requiring moderate stiffness and toughness, good cold temperature impact properties.Applications: Industrial and lubricant pails.Data provided by .. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | ASTM D790 |
NOVA Chemicals Sclair® 2815 HDPE Injection Molding Resin Features: Excellent balance of stiffness and toughness, low odor.Applications: Margarine and spreads, thin walled containers, frozen food containers.Data provided by the manufacturer. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | ASTM D790 |
Petromont 1202 High Density Polyethylene Resin Petromont HDPE 1202 is a high-density polyethylene copolymer resin produced using the UNIPOL® Process. This resin is designed for use in the blow moulding of large parts such as shipping containers.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 0.05 in/mm, 1% Secant, Procedure A; ASTM D790 |
Phillips 66 COPYLENE® CR350CS-01 Polypropylene Random Copolymer COPYLENE® CR350CS-01 is a clarified, reactor grade, random copolymer specially designed for clear injection molding applications and is formulated with lube for excellent mold release for larger ar.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | Tangent; ASTM D790 |
RheTech Products HP512-00 High Performance Polypropylene Copolymer, Non-UV Stabilized, Natural Applications: Interior trimI/P componentsCenter consolesInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | ASTM D790 |
Formosa Plastics Formolene® LH5206 Injection Molding HDPE
(discontinued **) CopolymerApplications: Pails, lidsFormolene LH5206 is a high density polyethylene for injection molding applications.Meets all requirements of the U.S. Food and Drug Administration as specified in 2.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 0.05 in/mm, 1% Secant, Procedure A; ASTM D790 |
Phillips 66 COPYLENE® CM015 Polypropylene Impact Copolymer COPYLENE™ CM015 is low melt flow impact copolymer with a barefoot additive package and is designed for excellent processing in injection molding and extrusion applications.Applications: Injection M.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | Tangent, 16:1 span:depth,0.5in/min; ASTM D790 |
Chevron Phillips Marlex® C513UV HDPE Blow Molding Resin
(discontinued **) Resin Type: Hexene CopolymerCharacteristics: Outstanding impact resistanceExcellent ESCRExcellent processabilityUV stabilizationApplications: Intermediate bulk containersAgricultural containersInfor.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | ASTM D790 |
M. Holland Company CP510 Polypropylene Copolymer Additives: Heat Stabilizer, Nucleating AgentsFeatures: High Flow, High Impact Resistance, Heat Stabilizer, NucleatedUses: Construction Applications, Lawn and Garden EquipmentApprovals: FDA 21 CFR 17.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 1% secant; ASTM D790-02 |
Ipiranga Petrochem PCC 4414 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 2mm/min; ISO 178 |
Borealis Daplen™ EF005AE Polypropylene TPO Compound Daplen™ EF005AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness, give.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | ASTM D790 |
A. Schulman PP 1116-01 Polypropylene Molding Grade Copolymer Polypropylene DescriptionPolypropylene PP 1116-01 is a molding grade copolymer polypropylene with improved low temperature toughness and good room temperature toughness. Information provided by A. Schulman. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 1.3mm per min, 1% secant; ASTM D790 |
Formosa Plastics Formolene® 6535N Impact Copolymer Polypropylene Impact Copolymer - Designed to Meet the Physical Requirements of Automotive Interior Trim Formolene® 6535N is an engineered, medium impact copolymer polypropylene. It was specifically developed to.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | Tangent, 16:1 span:depth,0.5in/min; ASTM D790 |
Chevron Phillips Marlex® 9005 HDPE Injection Molding Resin Resin Type: Hexene CopolymerCharacteristics: Moderate flowExcellent impact strengthExcellent ESCRGood warpage resistanceApplications: Industrial partsSeatsFood and household containersAgricultural p.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | Tangent, 16:1 span:depth,0.5in/min; ASTM D790 |
Chevron Phillips Marlex® 9503H HDPE Blow Molding Resin Resin Type: Hexene CopolymerCharacteristics: Outstanding ESCRExcellent impact resistanceApplications: Detergent bottlesIndustrial containers/large partsHousehold and industrial chemical containersIn.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | Tangent; ASTM D790 |
Chevron Phillips Marlex® 9509HF High Density Polyethylene, Blow Molding This gas phase, high molecular weight, hexane copolymer with synthetic antistatic agent is tailored for lightweight blow molded applications that:Require outstanding ESCRRequire excellent impact res.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | Tangent; ASTM D790 |
Chevron Phillips Marlex® C513UV High Density Polyethylene, Blow Molding This extra high molecular weight, hexane copolymer is tailored for intermediate bulk container applications that require:Outstanding impact resistanceOutstanding ESCRExcellent processabilityUV stabi.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 2% Secant; Molded and tested in accordance with ASTM D4976; ASTM D790 B |
Dow DMDA-8907 NT 7 High Density Polyethylene Resin DOW DMDA-8904 NT 7 is produced using UNIPOL™ process technology. It is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. Information.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 1% Secant; ASTM D790A |
Dow INSPIRE™ D560.00 Developmental Performance Polymer D 560.00 Performance Polymer has consistent processability, high gloss, good regrind stability, and contains U.V. stabilizers for increased weatherability. D 560.00 Performance Polymer is intended f.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | ASTM D790A |
Dow TF0807 TPO Dow Fascia TPO for Painted ApplicationsInformation provided by Dow |
|||
Flexural Modulus | >= 1.07 GPa | >= 155 ksi | ASTM D790 |
Buckeye Polymers BP PPC 0212 BLK Polypropylene Copolymer Product Information: Black Polypropylene Copolymer good for general purpose programs requiring moderate impact resistance.Product Features:Good impact resistanceGood UV resistanceGood chemical resis.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 0.05 in/min, 1% secant; ASTM D-790A |
Braskem TR3120C Random Copolymer Polypropylene Description: Superior color and processing stability, low odor, good flow and set-up behavior, excellent see through clarity.Applications: Suggested uses include housewares, reusable food containers.. |
|||
Flexural Modulus | >= 1.07 GPa | >= 155 ksi | ASTM D790 |
Buckeye Polymers BP RPP 1012 T BLK Polypropylene, Talc Filled Product Information: Our Talc filled product lines exhibit excellent properties such as high stiffness, surface aesthetics, low coefficient of thermal expansion, low shrinkage, improved scratch and .. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 0.05 in/mm, 1% Secant, Procedure A; ASTM D790 |
Phillips 66 COPYLENE® CM015G Polypropylene Impact Copolymer COPYLENE® CM015G is low melt flow impact copolymer with a barefoot additive package and is designed for excellent processing in injection molding and extrusion applications.Applications:Injection M.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | Secant, 0.079 in/min; ISO 178 |
ExxonMobil Exxtral™ H1020H Performance Polyolefin Product Description: A specialty thermoplastic olefin resin with good flow, cold temperature impact resistance, low CLTE, medium shrinkage and excellent paintability for automotive exterior applicat.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | ASTM D790 |
Amco PRIMATOP HDPE 055952 Injection Molding Polyethylene HDPE 055952 features maximum toughness, good top loading capability, and high surface gloss. Applications include pails and beverage crates.Former A-Top Polymers product; part of Amco product line s.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | 0.5 in/min, Tangent Method; ASTM D790 |
Amco PRIMATOP PP CO 200 NB Impact Polypropylene Copolymer PP CO 200 NB is cold temperature impact resistant, heat stabilized, and nucleated. Applications include toys and consumer products.Former A-Top Polymers product; part of Amco product line since 2013.. |
|||
Flexural Modulus | 1.07 GPa | 155 ksi | ASTM D790 |
Chase Plastics CP Pryme® PPC100NB-10M Polypropylene Copolymer Information provided by Chase Plastics. |