Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 585 MPa @Temperature 100 °C |
84800 psi @Temperature 212 °F |
EN min.; EN 10002-5 |
Outokumpu 253MA® High Temperature Austenitic Stainless Steel Variant of 1.4828 with increased nitrogen content and has been microalloyed with rare earth metals (REM). The most suitable temperature range is 850-1100°C, because structural changes when used be.. |
|||
Tensile Strength, Ultimate | 585 MPa | 84800 psi | Outokumpu Typical, Hot Rolled Plate (Quarto); EN 10002-1 |
Outokumpu 4305 Austenitic Stainless Steel Good general corrosion resistance.Applications: Where machinability is required - threaded bar, studs, domestic appliances.Available in bar and rod forms. |
|||
Tensile Strength, Ultimate | >= 585 MPa | >= 84800 psi | |
MetalTek MTEK 221-01 Cast UNS J84090 Martensitic Stainless Steel Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 585 MPa | >= 84800 psi | |
MetalTek MTEK 223-01 Cast UNS J84090 Martensitic Stainless Steel Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 585 MPa | >= 84800 psi | |
MetalTek MTEK 230-N Cast UNS C95800 Aluminum Bronze Versatile alloy with high strength, good ductility, unusual toughness, plus exceptional wear resistance. Aluminum Bronze heat treated to higher mechanical properties where necessary.Information prov.. |
|||
Tensile Strength, Ultimate | >= 585 MPa | >= 84800 psi | |
MetalTek Nitronic® 50 Cast UNS J93790 Austenitic Stainless Steel Corrosion resistance and high strength. Produced under license of ARMCO Advanced Materials Corp. Applications: Deck equipment, pumps, valves.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 585 MPa | >= 84800 psi | |
MetalTek MTEK 29-10 Cast UNS J93403 Heat Resistant Stainless Steel Higher chrome and nickel bring greater strength and ductility.Applications: Furnace chains, ore roasting equipment.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 585 MPa | >= 84800 psi | |
MetalTek Nitronic® 60 Cast UNS J92972 Austenitic Stainless Steel Wear and galling resistance. Produced under license of ARMCO Advanced Materials Corp. Applications: Pump wear rings, valve trim.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | 585 MPa | 84800 psi | Typical |
TIMET CP Titanium (ASTM Grade 3) Commercially Pure Titanium. Industry Specifications: USA Aerospace: AMS 4900. Germany Aerospace: 3.7055. France: T-50. UK Aerospace Specification DTD 5023, 5273.Features: The mechanical properti.. |
|||
Tensile Strength, Ultimate | 585 MPa | 84800 psi | |
CMW® ELKON 100M Pure Molybdenum Molybdenum (ELKON® 100M) is a refractory metal that resembles tungsten in many respects. Its hardness, melting, and boiling temperatures are only slightly lower than those of tungsten are. The elec.. |
|||
Tensile Strength, Ultimate | 585 MPa | 84800 psi | |
ATI Allegheny Ludlum Grade 3 Titanium (UNS R50550) Uses: CPI equipment, industrial components, heat exchangers.Mechanical property data below is typical of annealed samples at room temperature.Information provided by Allegheny Ludlum. |
|||
Tensile Strength, Ultimate | 585 MPa @Temperature 760 °C |
84800 psi @Temperature 1400 °F |
|
Haynes 230® alloy, cold rolled and 1232°C solution annealed sheet Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applicat.. |