Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 17.2 MPa | 2490 psi | ASTM D638 |
Multibase Multi-Flex® TPE D 4310 Multi-Flex® D 4310 Natural was designed to replace Himont's CA 53 G material. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Tensile Strength, Ultimate | >= 17.2 MPa | >= 2490 psi | ASTM D412 |
Multibase Multi-Flex® TPE G 7890 BLK The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Tensile Strength, Ultimate | 17.2 - 25.5 MPa | 2490 - 3700 psi | ASTM D638 |
Polikim EFALON® C-15 PTFE, 15% Glass Filled C15 and C25 have less thermal expansion, higher wear resistance and less deformation under load compared to virgin Efalon® (PTFE). Applications: Seals, Seal rings, gaskets, valve sets, piston rings.. |
|||
Tensile Strength, Ultimate | 17.2 MPa | 2490 psi | ASTM D638-95 |
Multibase Multi-Flex® TPO D-6206 This TPO product was developed for facia applications exhibiting adhesion for current automotive paint systems.Data provided by Multibase. |
|||
Tensile Strength, Ultimate | 17.2 MPa | 2490 psi | ASTM D638 |
Chevron Phillips 4538B LDPE Injection Molding Resin
(discontinued **) Resin Type: Homopolymer; ASTM D 4976 Classification: PE 113, A 05200Characteristics: Good Flexibility, Moderate Flow, Moderate Warping Resistance, Good Mold Release, Excellent ESCRApplications:Perso.. |
|||
Tensile Strength, Ultimate | 17.2 MPa | 2490 psi | |
Freudenberg Simrit V176 Standard Fluoroelastomer Excellent resistance to petroleum products and solvents. Very good high-temperature performance. Fluorocarbon elastomers make up the most widely used seals in the semiconductor industry. Avoid polar.. |
|||
Tensile Strength, Ultimate | 17.2 MPa | 2490 psi | |
Dow Primacor® 3340 Ethylene Acrylic Acid (EAA) PRIMACOR® 3340 polymer containing 6.5% comonomer is an extrusion/ coextrusion coating and laminating for flexible packaging applications. It is designed to provide excellent adhesion and outstandin.. |
|||
Tensile Strength, Ultimate | 17.2 MPa | 2490 psi | Cured 7 min at 177°C and Post Cured 16 hr at 232°C |
DuPont Performance Polymers VTR 8525 (GBLT-S) GFLT-600 Formulation
(discontinued **) FormulationViton® GFLT 600 |