Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 9.70 MPa | 1410 psi | ASTM D638 |
Multibase Multi-Flex® TPE A 8502 P BLK , 37.5% Filler Content The following data represents the actual data obtained from Lot # 941101-5. The moisture content is 0.03%. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Tensile Strength, Ultimate | 9.72 MPa | 1410 psi | post cured- 4 hours at 204°C |
Multibase SILASTIC® C7-4550 CADOX BSD Dow-Corning Biomedical Grade ETR Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 9.70 MPa | 1410 psi | ASTM D638 |
Chevron Phillips 1006 LDPE Injection Molding Resin
(discontinued **) Resin Type: homopolymerCharacteristics: excellent flexibility, excellent flow, good warping resistance, moderate mold release, moderate ESCRApplications: large housewares, tamper evident snap-on cap.. |
|||
Tensile Strength, Ultimate | 9.70 MPa | 1410 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman 1870A Polyethylene
(discontinued **) Polyethylene 1870A is a low density formulation with excellent flow characteristics for injection molding. It is used for such applications as container closures that require stress-crack resistanc.. |
|||
Tensile Strength, Ultimate | 9.70 MPa | 1410 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman 808E Polyethylene
(discontinued **) Low density polyethylene 808E is a general-purpose formulation used general-purpose extrusion. Under regulations administered by the US FDA, 808E may lawfully be used as articles or components of a.. |
|||
Tensile Strength, Ultimate | 9.70 MPa | 1410 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman E6838-850P Polyethylene
(discontinued **) E6838-850P is a low density resin designed for applications where high coating speeds and good drawdown are required. The combination of high melt index and low density also provides good heat seal.. |
|||
Tensile Strength, Ultimate | 9.70 MPa | 1410 psi | ASTM D638 |
NOVA Chemicals Novapol® LF-0222-A LDPE Wire and Cable Resin
(discontinued **) NOVA Chemicals NOVAPOL® LF-0222-A is a medium molecular weight low density polyethylene. Resin consistency and purity are very high which make it suitable as a base resin in Wire and Cable applicat.. |
|||
Tensile Strength, Ultimate | 9.70 MPa | 1410 psi | ISO 527-1/-2 |
DSM Arnitel® XG6029 TPC-ET Extrusion Grade |
|||
Tensile Strength, Ultimate | 9.70 MPa | 1410 psi | |
Dow Primacor® 5980I Ethylene Acrylic Acid (EAA) PRIMACOR® 5980I dispersible polymer is an ethylene acrylic acid copolymer (20 wt % comonomer) which is dispersible in aqueous alkali and amines. Excellent adhesion to metallic, cellulosic, glass an.. |
|||
Tensile Strength, Ultimate | 9.72 MPa | 1410 psi | ASTM D412; ISO 37 |
Advanced Polymer Alloys Alcryn® 2265 UT Melt Processable Rubber Alcryn melt-processable rubber (MPR) is a true rubber, based on a partially cross-linked, chlorinated olefin interpolymer alloy. Alcryn is designed for the manufacture of rubber parts with high prod.. |
|||
Tensile Strength, Ultimate | 9.70 MPa | 1410 psi | ASTM D638 |
Buckeye Polymers BP Flex D0840 TPO Replace Flex PVCTPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment. These resins have excellent UV resis.. |