Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 |
Plaskolite Optix® CA-927 Impact Modified Acrylic Resin Injection Molding Grade Pellets. Better impact strength than CA-924. Excellent surface gloss, optical clarity, and practical toughness. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 |
Plaskolite West Optix® CA-927 Impact Modified Acrylic Resin Injection Molding Grade Pellets. Better impact strength than CA-924. Excellent surface gloss, optical clarity, and practical toughness. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 |
NCMT NanoPAC™ G2050H High Performance Polypropylene Nanocomposite Applications: Construction MaterialInformation provided by Nano Composite Materials Technology Limited |
|||
Tensile Strength, Ultimate | 50.0 - 130 MPa @Temperature -20.0 - 100 °C |
7250 - 18900 psi @Temperature -4.00 - 212 °F |
Average value: 53.1 MPa Grade Count:1 |
Overview of materials for Polybutylene Terephthalate (PBT), 10% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), 10% Glass Fiber Filled".Specific grades with glass content between 5% .. |
|||
Tensile Strength, Ultimate | 50.0 - 130 MPa @Temperature 125 - 275 °C |
7250 - 18900 psi @Temperature 257 - 527 °F |
Average value: 86.7 MPa Grade Count:1 |
Overview of materials for Polyetherketoneetherketoneketone (PEKEKK), Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyetherketoneetherketoneketone (PEKEKK), Glass Fiber Filled". Each property range of values reported i.. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ISO 527 |
Eastman EASTALLOY Polymer DA105, Natural Alloy
(discontinued **) General: All ISO tests are run @ 4-mm thickness with the exception of Impact Resistance, which is run @ 2-mm thickness. Comments: Properties reported here are typical of average lots. Eastman ma.. |
|||
Tensile Strength, Ultimate | 50.0 - 120 MPa | 7250 - 17400 psi | Average value: 90.1 MPa Grade Count:8 |
Overview of materials for Polystyrene + Polyphenylene Ether, Glass + Mineral Filler This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene + Polyphenylene Ether, Glass + Mineral Filler". Each property range of values reported is mi.. |
|||
Tensile Strength, Ultimate | 50.0 MPa @Temperature 120 °C |
7250 psi @Temperature 248 °F |
ISO 527 |
LATI LARIL 13 G/20-V1 20% Glass Fiber Reinforced Polyphenylene Oxide (PPOm) (UL94V-1)
(Unverified Data**) Description: Laril thermoplastics are polyphenylene oxide (PPOm) products. They exhibit excellent toughness, even at low temperatures, good thermal resistance and dimensional stability are the most .. |
|||
Tensile Strength, Ultimate | 50.0 - 123 MPa | 7250 - 17900 psi | Average value: 91.5 MPa Grade Count:11 |
Overview of materials for ABS/Polyester Alloy + GF This property data is a summary of similar materials in the MatWeb database for the category "ABS/Polyester Alloy + GF". Each property range of values reported is minimum and maximum values of appro.. |
|||
Tensile Strength, Ultimate | 50.0 MPa @Temperature 60.0 °C |
7250 psi @Temperature 140 °F |
ISO 527 |
LATI LATAN 13 G/15 15% Glass Fiber Reinforced Polyoxymethylene Copolymer (POM)
(discontinued **) Description: Latan series thermoplastics are polyoxymethylene copolymer (POM) products. The main applications for Latan feature good wear resistance, chemical inertness and low water absorption (gea.. |
|||
Tensile Strength, Ultimate | 50.0 - 265 MPa | 7250 - 38400 psi | Average value: 187 MPa Grade Count:44 |
Overview of materials for Nylon 66/6, 40% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66/6, 40% Glass Fiber Reinforced". Specific grades with glass content between 35% and 44% are incl.. |
|||
Tensile Strength, Ultimate | 50.0 - 200 MPa | 7250 - 29000 psi | Average value: 132 MPa Grade Count:127 |
Overview of materials for Nylon 66, Glass Fiber Filled, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Glass Fiber Filled, Flame Retardant". Each property range of values reported is minimum and ma.. |
|||
Tensile Strength, Ultimate | 50.0 - 165 MPa | 7250 - 23900 psi | Average value: 111 MPa Grade Count:83 |
Overview of materials for Nylon 66, Glass/Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Glass/Mineral Filled". Each property range of values reported is minimum and maximum values of.. |
|||
Tensile Strength, Ultimate | 50.0 MPa @Temperature 22.0 °C |
7250 psi @Temperature 71.6 °F |
25mm flat samples, compression moulded; ISO 527-4 |
Menzolit Menzolit® SMC 0500 Unsaturated Polyester UP SMC 0500 is a special SMC with reduced density. The glass level has been selected to combine good moulding with good strength and stiffness properties. Even without a specific fire retardant the fir.. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | 90° Fiber Direction; ASTM D3039 |
Saint-Gobain Quartzel® Fiber/Cyanate Ester Resin Unidirectional Composite Fiber: Quartzel® Silica Roving C9 667 QS16 (33). Resin: YLA RS-3C.Quartzel® fiber is produced from quartz crystal that is ground, purified, fiberized by a fusion process. It is homogeneous,.. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | |
Saint-Gobain Vitreosil® CFQ/TSC Optical Fused Quartz Vitreosil® CFQ/TSC grades are for use in less demanding applications including viewing windows for use in corrosive and high temperature environments and non-optical components such as spacers, i.. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 |
SK Chemicals SKYPEL G455D Special Grade Oil-Resistant Grade SKYPEL is a thermoplastic polyester elastomer (TPEE). It is a polymer resin having the property somewhere between plastics and rubber, which have various properties ranging from high hardness plasti.. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 |
Plenco 3557 Phenolic, Granular, Compression Molded PLENCO 03557 is a woodflour and mineral filled phenolic molding compound offering excellent dielectric strength values at elevated temperatures while maintaining mechanical strength properties. UL r.. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 |
Plenco 7202 Phenolic, Granular, Injection Molded PLENCO 07202 is an organic fiber reinforced phenolic molding compound, formulated to offer improved mechanical strength properties with an industrial finish. UL recognized under component file E4065.. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 |
Tipco Tipcolite® TG 211 Phenolic Compound, Mineral & Wood Flour, Soft Flow & High Electrical Properties Soft Flow Phenolic Compound, Reinforced with Mineral & Wood FlourApplications: Electrical & ElectronicsProcessing: Compression MoldingInformation provided by the Manufacturer, Tipco Industries Ltd.. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 |
Covestro Bayblend® T 85 Polycarbonate/ABS Blend High impact and notched impact strength, little risk of brittle fracture, high dimensional accuracy.Applications: Automotive components, electrical engineering.Information provided by Bayer.As of 1 .. |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | dry; ISO 527-1/-2 |
DSM Stanyl® TC551 PA46 FR(17) Thermal conductive material, Flame Retardant |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | cond; ISO 527-1/-2 |
DSM EcoPaXX® Q-X07290 PA410-I Impact Modified |
|||
Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ATSM D638 |
Ashley Polymers Ashlene® 257 PPO A high flow grade for applications requiring high impact strength, heat resistance and dimensional stability.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 50.0 - 80.0 MPa @Strain 0.600 - 1.40 % |
7250 - 11600 psi @Strain 0.600 - 1.40 % |
Average value: 70.2 MPa Grade Count:1 |
Overview of materials for Polyethersulfone (PES), 30% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyethersulfone (PES), 30% Glass Fiber Filled". Specific grades with glass content between 25% and 34% .. |
|||
Tensile Strength, Ultimate | 50.0 - 170 MPa @Temperature -40.0 - 120 °C |
7250 - 24700 psi @Temperature -40.0 - 248 °F |
Average value: 83.0 MPa Grade Count:2 |
Overview of materials for Polyethylene Terephthalate (PET), Glass Fiber Filled, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Polyethylene Terephthalate (PET), Glass Fiber Filled, Flame Retardant". Each property range of values re.. |
|||
Tensile Strength, Ultimate | 50.0 - 55.0 MPa @Temperature 160 - 160 °C |
7250 - 7980 psi @Temperature 320 - 320 °F |
Average value: 78.5 MPa Grade Count:1 |
Overview of materials for Polysulfone, 30% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Polysulfone, 30% Glass Fiber Reinforced". Specific grades with glass content between 25% and 34% are inc.. |