Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 485 MPa @Temperature 200 °C |
70300 psi @Temperature 392 °F |
EN min.; EN 10002-5 |
Outokumpu 153MA™ High Temperature Austenitic Stainless Steel Variant of 1.4301 with increased silicon and nitrogen contents and microalloyed with rare earth metals (REM). This raises the max service temperature in dry air to 1000°C.Applications: Heat and cr.. |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek HAYNES® 230 Severe Corrosion and Heat Resistant Alloy Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 150 Cast UNS C95220 Aluminum Bronze Versatile alloy with high strength, good ductility, unusual toughness, plus exceptional wear resistance. Aluminum Bronze heat treated to higher mechanical properties where necessary.Information prov.. |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 20-10 Cast UNS J92603 Heat Resistant Stainless Steel Economical heat resistant grade with sufficient chrome and nickel for good oxidation resistance.Applications: Burner tips, furnace rails, annealing boxes, trays, burnishing rolls.Information provide.. |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 20M Cast UNS J94650 Super Austenitic Stainless Steel Corrosion resistance approaching nickel alloys, especially in chloride service.Applications: Process piping exposed to flue gas and solutions.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 304 Cast J92600 Austenitic Stainless Steel "300" series, general corrosion resistant alloyApplications: Nuclear, chemical and food processing. Valve and pump trim.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 309 Cast UNS J93400 Austenitic Stainless Steel "300" series, general corrosion resistant alloyApplications: Nuclear, chemical and food processing. Valve and pump trim.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 316 Cast UNS J92900 Austenitic Stainless Steel "300" series, general corrosion resistant alloyApplications: Nuclear, chemical and food processing. Valve and pump trim.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 316L Cast UNS J92800 Austenitic Stainless Steel "300" series, general corrosion resistant alloyApplications: Nuclear, chemical and food processing. Valve and pump trim.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 347 Cast UNS J92710 Austenitic Stainless Steel "300" series, general corrosion resistant alloyApplications: Nuclear, chemical and food processing. Valve and pump trim.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK CY-40 Cast UNS N06040 Severe Corrosion and Heat Resistant Alloy Good strength and toughness from cryogenic to elevated temperatures.Applications: Nuclear flow control, chemical process flanges and fittings.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 302 Cast CF16Fa Austenitic Stainless Steel Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 304L Cast UNS J92500 Austenitic Stainless Steel "300" series, general corrosion resistant alloyApplications: Nuclear, chemical and food processing. Valve and pump trim.Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 430 Martensitic Stainless Steel Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 617 Severe Corrosion and Heat Resistant Alloy Information provided by MetalTek |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
MetalTek MTEK 625 Cast UNS N26625 Severe Corrosion and Heat Resistant Alloy Information provided by MetalTek |
|||
Tensile Strength, Ultimate | 485 MPa @Temperature 870 °C |
70300 psi @Temperature 1600 °F |
|
Haynes 25 alloy, cold worked sheet, 15 % cold reduction Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal ga.. |
|||
Tensile Strength, Ultimate | 485 MPa | 70300 psi | Typical |
TIMET TIMETAL® 50A CP Titanium (ASTM Grade 2) Commercially Pure Titanium.Industry Specifications: USA Aerospace: AMS 4902, 4941. Germany Engineering: 3.7035. Germany Aerospace: 3.7034. France: T-40. UK Aerospace Specifications BS TA. 2, 3,.. |
|||
Tensile Strength, Ultimate | 485 MPa @Temperature 482 °C |
70300 psi @Temperature 900 °F |
Sheet |
AK Steel NITRONIC® 30 Austenitic Stainless Steel AK Steel NITRONIC 30 Stainless Steel offers significantly higher strength than Type 304 and potential for applications requiring good resistance to aqueous and atmospheric corrosion resistance combi.. |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | |
ATI Allegheny Ludlum Stainless Steel Chromium-Nickel Type 304L, Annealed (UNS S30403) This alloy is one of the most familiar and most frequently used alloy in the stainless steel family. It may be best used in applications where the following properties are important: resistance to .. |
|||
Tensile Strength, Ultimate | 485 MPa | 70300 psi | Typical |
Aleris Hokotol Aluminum Alloy, 325 mm Thickness Sample treatment not specified for property data.Applications include molds for blow forming and injection molding for plastics; bolsters and force plates; high strength/low weight machine parts; an.. |
|||
Tensile Strength, Ultimate | 485 MPa | 70300 psi | |
ATI Allegheny Ludlum Grade 16 Titanium (UNS R52402) Uses: CPI equipment, industrial components, condenser tubing.Mechanical property data below is typical of annealed samples at room temperature.Information provided by Allegheny Ludlum. |
|||
Tensile Strength, Ultimate | >= 485 MPa | >= 70300 psi | Annealed; Min required by ASTM A 240 and ASME SA-240 |
ATI Allegheny Ludlum Type 316L Stainless Steel, UNS S31603 This is a molybdenum-bearing austenitic stainless steels which is more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels .. |