Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | >= 250 MPa | >= 36300 psi | |
MetalTek NAVY G 1% LEAD Cast UNS C92300 Bearing Bronze Copper-tin alloy with high tensile, yield and compressive strength as well as wear resistance.Applications: Worm gears, steel mill nutsInformation provided by MetalTekCast UNS C92300; Cast Grade C92.. |
|||
Tensile Strength, Ultimate | 250 - 330 MPa | 36300 - 47900 psi | |
SSAB Tunnplat Docol® 4D Deep-drawing Steel Deep-drawing SteelComments: Docol - Cold Rolled Mild Steel. Property values are for cold-rolled steel; thicknesses 0.40 - 3.00 mm. Iron content is approximate - exact composition is not reported b.. |
|||
Tensile Strength, Ultimate | 250 MPa | 36300 psi | |
Sapco 98% Aluminum Oxide Information provided by Sapco. |
|||
Tensile Strength, Ultimate | 250 MPa | 36300 psi | Fiber value estimated from tenacity; ASTM D3218 |
Total PPH 3762 Polypropylene, Extrusion Grade Homopolymer fiber grade for staple fiber and multifilament yarnsFading Resistance - FINA 3762 is formulated to resist gas fading while maintaining excellent processing stability up to 250oC.Process .. |
|||
Tensile Strength, Ultimate | 250 MPa | 36300 psi | dry; ISO 527-1/-2 |
DSM Stanyl® 46HF4550 PA46-GF50 50% Glass Reinforced, Heat Stabilized, High Flow, for E&E applications |
|||
Tensile Strength, Ultimate | 250 MPa | 36300 psi | |
China Tungsten STG60-25 PM Structural Parts Information provided by China Tungsten |
|||
Tensile Strength, Ultimate | 250 MPa | 36300 psi | |
China Tungsten STG90-25 PM Structural Parts Information provided by China Tungsten |
|||
Tensile Strength, Ultimate | 250 MPa | 36300 psi | |
Ametek Ultra 304L P/M Stainless Steel, Sintered from 6.2 g/cc Green Density Ametek's patented Ultra Stainless Steels™ are produced by alloying the conventional austenitic compositions with a small amount of a copper-nickel-tin alloy. This results in a marked improvement i.. |
|||
Tensile Strength, Ultimate | 250 - 310 MPa | 36300 - 45000 psi | |
ArcelorMittal 07 High formability steel for drawing, Cold rolled Available in the following: uncoated (DC07) Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used extensively in the au.. |
|||
Tensile Strength, Ultimate | 250 MPa @Thickness 5.00 - 12.0 mm |
36300 psi @Thickness 0.197 - 0.472 in |
Typical L-T Direction |
Aleris HOGAL 5558 Aluminum 5026-O/H111 HOGAL 5558 is produced according to EN AW-5026.Information provided by Aleris. |
|||
Tensile Strength, Ultimate | 250 MPa | 36300 psi | |
Ametek Ultra 303L P/M Stainless Steel, Sintered from 6.0 g/cc Green Density Ametek's patented Ultra Stainless Steels™ are produced by alloying the conventional austenitic compositions with a small amount of a copper-nickel-tin alloy. This results in a marked improvement i.. |
|||
Tensile Strength, Ultimate | >= 250 MPa | >= 36300 psi | Guaranteed Minimum L-T Direction |
Aleris HOGAL 5558 Aluminum 5026 H14/H34 HOGAL 5558 is produced according to EN AW-5026.Information provided by Aleris. |
|||
Tensile Strength, Ultimate | 250 MPa | 36300 psi | dry; ISO 527-1/-2 |
DSM Stanyl® TS200F10 PA46-GF50 50% Glass Reinforced |