Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Peel Strength | 1.05 kN/m | 6.00 pli | Copper, After Solder Float, 1/2 ounce TCR Foil; IPC-TM-650 2.4.8 |
Rogers Corporation RO4003C Glass-Reinforced Hydrocarbon and Ceramic Laminate with Thin Film Resistor Foil RO4000® Series High Frequency Circuit Materials are glass-reinforced hydrocarbon and ceramic (not PTFE) laminates with TICER™ TCR® Thin Film Resistor Foils. These laminates are designed for perf.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 19562R025 0.025" (0.635 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone Rubber Appearance: Red silicone gum on fiberglass clothThis data represents typical values for the production material. The data should not be used to wr.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 28561R015M 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone Rubber Appearance: Red silicone gum on fiberglass fabricThis data represents typical values for the production material. T.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 28571B015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone RubberThis data represents typical values for the production material. The data should not be used to write, or in place o.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | To Copper (1 oz./35 micron); After Process Solutions; IPC TM-650 2.4.8 |
Arlon 35N Fast Cure Polyimide Laminate and Prepreg High reliability and high temperature material35N is a pure polyimide laminate and prepreg system for applications requiring high temperature performance. High Tg results in low Z-direction expansi.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 51571XC015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place .. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 51580R015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberThis data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Info.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 51601W015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone RubberProduct Use: Flexible heater insulationAppearance: White silicone gum on fiberglass with polymer release linersThis .. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 55578XD028 0.028" (0.711 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSide 2: Cured/Uncured Layers Appearance: Gray silicone gum and/or rubber on fiberglass clothThis data Represents typical values for the production ma.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 55949C028W 0.029" (0.737 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone Rubber LayerSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in pl.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 56596R045 0.045" (1.14 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone Rubber Side 2: Uncured Silicone RubberProduct Use: Flexible heater insulationAppearance: Red silicone gum and rubber on fiberglass with polymer release lin.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, anodized |
3M Controltac™ 3690C Graphic Film with Comply™ Adhesive This is a 2-mil white, clear or black film for screen printing graphics. The aggressive, pressure activated-adhesive is slideable and repositionable, and has air release channels for fast and easy b.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, anodized |
3M Scotchcal™ 3690 Graphic Film This is a 2-mil white for black film for screen printing graphics. The aggressive, pressure sensitive-adhesive is well suited for graphics applied to sand cast, moderately rough surfaces and some lo.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, anodized |
3M Scotchcal™ 8000-114 Graphic Film This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, anodized |
3M Scotchcal™ 8000-13 Graphic Film This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum |
3M Scotchlite™ 680-64 Reflective Graphic Film 7-mil, enclosed lens, retroflective, engineer grade films that offer flexibility and versatility; Available in 11 colors, including black (which reflects white); Similar daytime and nighttime appear.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum |
3M Scotchlite™ 680-72 Reflective Graphic Film 7-mil, enclosed lens, retroflective, engineer grade films that offer flexibility and versatility; Available in 11 colors, including black (which reflects white); Similar daytime and nighttime appear.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 30580R015 0.015" (0.381 mm) Uncured Unsupported Silicone Rubber on Kodacel Carrier Design/Construction:Side 1: Uncured Unsupported Silicone Rubber on Kodacel Carrier Appearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The d.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 30580R020 0.020" (0.508 mm) Uncured Unsupported Silicone Rubber on Kodacel Carrier Design/Construction:Side 1: Uncured Unsupported Silicone Rubber on Kodacel CarrierAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The da.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 30580R030 0.030" (0.762 mm) Uncured Unsupported Silicone Rubber on Kodacel Carrier Design/Construction:Side 1: Uncured Unsupported Silicone Rubber on Kodacel CarrierAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The da.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength, side 2 to side 2 |
Arlon 51426W015 0.015" Cured/Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSubstrate: Prime Coated 7628 FiberglassSide 2: Uncured Silicone RubberInterleave: 3 mil PolyethyleneThis data represents typical values for the pr.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Stainless Steel, 180° Peel, Conditioned for 3 days at RT; ASTM D3330 |
3M 7903FL Screen Printable Sheet Polyester Label Material 3M™ Screen Printable Sheet Polyester Label Materials are durable, high performance materials that offer excellent thermal stability, moisture resistance and chemical resistance. These materials uti.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon R31031R025 0.025" Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 0.003" PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Prime Coated 1564 FiberglassSide 2: Uncured Silicone RubberThis data represents typical values for th.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, anodized |
3M Scotchcal™ 3650-12 Graphic Film 2-mil opaque film; Available in white, black and transparent; Pressure-sensitive adhesive; Resists gasoline vapors and occasional petroleum spills; Permanent filmInformation provided by 3M |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, anodized |
3M Scotchcal™ 8000LF-23 Graphic Film This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, anodized |
3M Scotchcal™ 8628 ES Translucent Graphic Film Film 8628 ES is a 2 mil, translucent graphic film with pressure-sensitive adhesive. It is designed for flat, single or multi-layered internally illuminated signs or window graphics, both indoors and.. |
|||
Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum |
3M Scotchlite™ 680-76 Reflective Graphic Film 7-mil, enclosed lens, retroflective, engineer grade films that offer flexibility and versatility; Available in 11 colors, including black (which reflects white); Similar daytime and nighttime appear.. |
|||
Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
Arlon 41580R020 0.020" Uncured, Unsupported Silicone Rubber on Release Carrier Design/Construction:Interleave: 0.003" PolyethyleneSide 1: Uncured, Unsupported Silicone RubberSubstrate: Holland Cloth CarrierThis data represents typical values for the production material and .. |