- HOME
- POLYMER SEARCH
- Polymer Property : Peel Strength = 6.00 pli
Polymer Property : Peel Strength = 6.00 pli Product List
Mechanical PropertiesTips: 30 items are displayed at most.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Peel Strength | 1.05 kN/m | 6.00 pli | Copper, After Solder Float, 1/2 ounce TCR Foil; IPC-TM-650 2.4.8 |
|
Rogers Corporation RO4003C Glass-Reinforced Hydrocarbon and Ceramic Laminate with Thin Film Resistor Foil
RO4000® Series High Frequency Circuit Materials are glass-reinforced hydrocarbon and ceramic (not PTFE) laminates with TICER™ TCR® Thin Film Resistor Foils. These laminates are designed for perf..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | Bond Strength |
|
Arlon 31580R015 0.015" (0.381 mm) Uncured Unsupported Silicone Rubber on an HDPE Carrier
(discontinued *
Design/Construction:Side 1: Uncured Unsupported Silicone Rubber on a HDPE CarrierAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The dat..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 515880R020 0.020" (0.508 mm) Uncured Silicone Rubber with Fiberglass Substrate
(discontinued **)&l
Design/Construction:Side 1: Uncured Silicone Rubber Appearance: Red silicone gum on fiberglass clothThis data Represents typical values for the production material. The data should not be used to wr..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 19562R025 0.025" (0.635 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone Rubber Appearance: Red silicone gum on fiberglass clothThis data represents typical values for the production material. The data should not be used to wr..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 28561R015M 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone Rubber Appearance: Red silicone gum on fiberglass fabricThis data represents typical values for the production material. T..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 30090R022 0.022" (0.559 mm) Uncured Unsupported Silicone Rubber on Kodacel Carrier
Design/Construction:Side 1: Uncured Unsupported Silicone Rubber on Kodacel Carrier Appearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The d..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | To Copper (1 oz./35 micron); After Process Solutions; IPC TM-650 2.4.8 |
|
Arlon 35N Fast Cure Polyimide Laminate and Prepreg
High reliability and high temperature material35N is a pure polyimide laminate and prepreg system for applications requiring high temperature performance. High Tg results in low Z-direction expansi..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | (S1 to S2) Bond Strength; Arlon SQA-TMS-011 |
|
Arlon 48101R008 0.008" (0.203 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave 1: PolyethyleneSide 1: Cured Silicone RubberSubstrate: Style 1080 FiberglassSide 2: Cured Silicone RubberInterleave 2: Polyethylene Product Use: Flexible heater insul..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 51570R015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone RubberAppearance: Red silicone gum on fiberglass clothThis data Represents typical values for the production material. The data should not be used to wri..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 51580R020 0.020" Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Interleave: 3 mil PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Style 7628 FiberglassThis data represents typical values for the production material and should not be ..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 55579R043W 0.043" (1.09 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured layer on top of a cured layer on one side This data Represents typical values for the production material. The data should not be used to write, or in place of, m..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 55596R030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Cured Silicone Rubber Side 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place o..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon R34696R026 0.026" (0.660 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Cured Silicone Rubber Side 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place o..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, etched |
|
3M Scotchcal™ 8000-15 Graphic Film
This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum |
|
3M Scotchlite™ 5100-10 Reflective Graphic Film
7-mil, enclosed lens, retroflective, engineer grade films that offer flexibility and versatility; Pressure-sensitive adhesive; Permanent; Available in 15 colors, including black (which reflects whit..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum |
|
3M Scotchlite™ 680-64 Reflective Graphic Film
7-mil, enclosed lens, retroflective, engineer grade films that offer flexibility and versatility; Available in 11 colors, including black (which reflects white); Similar daytime and nighttime appear..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum |
|
3M Scotchlite™ 680-72 Reflective Graphic Film
7-mil, enclosed lens, retroflective, engineer grade films that offer flexibility and versatility; Available in 11 colors, including black (which reflects white); Similar daytime and nighttime appear..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum |
|
3M Scotchlite™ RG680-10 Reflective Graphic Film
6-mil flexible, enclosed lens, retroreflective films; Available in white only; Similar daytime and nighttime appearance that retains most of its reflectivity when wet; Excellent angularity; Pressure..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 30580R020 0.020" (0.508 mm) Uncured Unsupported Silicone Rubber on Kodacel Carrier
Design/Construction:Side 1: Uncured Unsupported Silicone Rubber on Kodacel CarrierAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The da..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 49091R010 0.0105" (0.267 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured RubberSide 2: Uncured Silicone Rubber Appearance: Red silicone gum on fiberglass fabricThis data Represents typical values for the production material. The data s..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 51191R014 0.015" Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone RubberSubstrate: Prime Coated 7628 FiberglassSide 2: Uncured Silicone RubberInterleave: 3 mil PolyethyleneThis data represents typical values for the ..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 51576R027 0.027" (0.686 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Side 1: Cured Silicone RubberSubstrate: 7628 Style Fiberglass Side 2: Uncured Silicone Rubber This data represents typical values for the production mat..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 51586R040 0.040" (1.02 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Cured Silicone RubberSide 2: Uncured Silicone RubberAppearance: Red silicone gum and rubber on fiberglass clothThis data Represents typical values for the production mate..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon 56096R025 0.025" (0.635 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Cured Silicone Rubber Side 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place o..
|
|||
| Peel Strength | >= 1.05 kN/m | >= 6.00 pli | Bond Strength |
|
Arlon R33706R026 0.026" (0.660 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Cured Silicone Rubber Side 2: Uncured Silicone Rubber Product Use: Flexible heater insulationAppearance: Red silicone gum and rubber on fiberglass with polymer release li..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | 12 in/min, 90° pullback, Stainless steel |
|
3M Diamond Grade™ 983 Conspicuity Markings
3M™ Diamond Grade™ Conspicuity Markings Series 983 are highly retrorflective micro-prismatic markings designed to mark the sides and rear of vehicles for enhanced visibility and detection. The ref..
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, anodized |
|
3M Scotchcal™ 3650-12 Graphic Film
2-mil opaque film; Available in white, black and transparent; Pressure-sensitive adhesive; Resists gasoline vapors and occasional petroleum spills; Permanent filmInformation provided by 3M
|
|||
| Peel Strength | 1.05 kN/m | 6.00 pli | Adhesion to Aluminum, anodized |
|
3M Scotchcal™ 8000LF-14 Graphic Film
This 2-mil, screen printable film with a pressure sensitive adhesive that can be used on flat and simple curved surfaces. This film withstands severe weather dn handling conditions encountered by co..
|
|||
Copyright © lookpolymers.com All Rights Reserved