Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Yield Strength | 90.2 MPa | 13100 psi | ASTM D790 |
Kolon Kocetal® VT701 Modified Grade Acetal Copolymer
(discontinued **) Thermal properties: Kocetal has excellent heat stability; heat degradation is little under long term and high temperature application, compared to other POM. Maximum applicable temperature of produ.. |
|||
Flexural Yield Strength | 90.2 MPa @Thickness 6.40 mm |
13100 psi @Thickness 0.252 in |
2.8mm/min; ASTM D790 |
LG Chemical LUCEL N109LDS POM, Chemical Resistance Feature: Injection Molding, POM, Chemical ResistanceApplication: Copier, Clock, VCR, Printer Parts, etc.CAS No. 66455-31-0Information provided by LG Chemical |
|||
Flexural Yield Strength | 90.2 MPa @Thickness 3.20 mm |
13100 psi @Thickness 0.126 in |
2.8mm/min; ASTM D790 |
LG Chemical Lupox® GP1000D PBT Description: Injection Molding, PBT, General PurposeApplication: Automotive (Head Lamp Bezel)CAS No. 30965-26-5Information provided by LG Chemical |
|||
Flexural Yield Strength | 90.2 MPa @Thickness 3.20 mm |
13100 psi @Thickness 0.126 in |
1.3mm/min; ASTM D790 |
LG Chemical Lupox® LW5102F PBT+PC+GF10% Description: Injection Molding, PBT+PC+GF10%, Low Warpage, Flame RetardantApplication: IT/OA, E&E (Switch)CAS No. 9003-01-04, 68928-70-1, 65997-17-3, 24968-12-5, 103598-77-2 and 1309-64-4Information.. |
|||
Flexural Yield Strength | 90.2 MPa @Thickness 3.20 mm |
13100 psi @Thickness 0.126 in |
1.3mm/min; ASTM D790 |
LG Chemical Lupox® SG3180S PBT+PET+MF18% Description: Injection Molding, PBT+PET+MF18%, Good SurfaceApplication: Automotive (Head Lamp Bezel)CAS No. 30965-26-5, 25038-59-9 and 14807-96-6Information provided by LG Chemical |
|||
Flexural Yield Strength | 90.2 MPa @Thickness 3.20 mm |
13100 psi @Thickness 0.126 in |
10mm/min; ASTM D790 |
LG Chemical LUPOY GP5006B PC/ABS Description: Injection Molding, PC/ABS, General Purpose, High FlowApplication: Miscellaneous GoodsCAS: 103598-77-2, 9003-56-9 and 181028-79-5Information provided by LG Chemical |
|||
Flexural Yield Strength | 90.2 MPa @Thickness 3.20 mm |
13100 psi @Thickness 0.126 in |
15 mm/min; ASTM D790 |
LG Chemical XG569C MABS, Anti-Scratch, High Gloss Feature: Injection Molding, Anti-Scratch, High GlossApplication: LCD TV Front Cabinet, Bezel, Audio/Video HousingCSA No. 9011-14-7 and 9003-56-9Information provided by LG Chemical |
|||
Flexural Yield Strength | 90.2 MPa | 13100 psi | ASTM D790 |
Cheng Yu Plastic SW15 POM/PTFE |
|||
Flexural Yield Strength | 90.2 MPa | 13100 psi | ASTM D790 |
Cheng Yu Plastic FV3010 Polyformaldehyde |
|||
Flexural Yield Strength | 90.2 MPa | 13100 psi | ASTM D790 |
Cheng Yu Plastic FV3015 Polyformaldehyde |
|||
Flexural Yield Strength | 90.2 MPa | 13100 psi | ASTM D790 |
Cheng Yu Plastic FV3020 Polyformaldehyde |
|||
Flexural Yield Strength | 90.2 MPa | 13100 psi | ASTM D790 |
Cheng Yu Plastic FV3025 Polyformaldehyde |
|||
Flexural Yield Strength | 90.2 MPa | 13100 psi | ASTM D790 |
Cheng Yu Plastic FV3030 Polyformaldehyde |
|||
Flexural Yield Strength | 90.2 MPa | 13100 psi | ASTM D790 |
Cheng Yu Plastic FV3035 Polyformaldehyde |
|||
Flexural Yield Strength | 90.2 MPa | 13100 psi | ASTM D790 |
Cheng Yu Plastic FV3050 Polyformaldehyde |