Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 827 MPa @Strain 0.200 % |
120000 psi @Strain 0.200 % |
ASTM E345-93, Type A Specimen |
NiCoForm NiColoy® E Electroformed Nickel-Cobalt NiColoy® is a proprietary electrodeposited Nickel-Cobalt alloy distinguished by the following combination of features:Leveled, smooth matte to semi bright deposit with low internal stressHigh tensi.. |
|||
Tensile Strength, Yield | 827 MPa @Temperature 121 °C |
120000 psi @Temperature 250 °F |
0° Direction; 270°F Oven Cure, 350°F Postcure; ASTM D3039 |
Park Electrochemical Nelcote® E-752 Epoxy Prepreg, 6K 5HS T300 Reinforced Nelcote® E-752 is a toughened, 185°C cure epoxy system designed for demanding structural applications up to 130°C. E-752 offers a good balance of toughness, high service temperature and good mois.. |
|||
Tensile Strength, Yield | 824 MPa @Strain 0.200 %, Thickness 1.45 mm |
120000 psi @Strain 0.200 %, Thickness 0.0571 in |
|
Haynes Hastelloy® S alloy, flat products, solution heat-treated at 538°C (1000°F), aged 8000 hours Nickel-based, high temperature alloy. Excellent thermal stability, low thermal expansion, excellent oxidation resistance to 1093°C, good high temperature and thermal fatigue strength. Application.. |
|||
Tensile Strength, Yield | 824 MPa @Treatment Temp. 593 °C, Time 1.44e+7 sec |
120000 psi @Treatment Temp. 1100 °F, Time 4000 hour |
0.2%. Room temp test after thermal exposure |
Haynes Hastelloy® C-22HS™ Nickel Alloy Plate, Age-hardened Outstanding Corrosion Resistance, High Strength HASTELLOY® C-22HSTM alloy is corrosion-resistant, nickel-chromium-molybdenum alloy which can be heat treated to obtain a strength approximately dou.. |
|||
Tensile Strength, Yield | 826 MPa @Treatment Temp. 593 °C, Time 2.88e+7 sec |
120000 psi @Treatment Temp. 1100 °F, Time 8000 hour |
0.2%. Room temp test after thermal exposure |
Haynes Hastelloy® C-22HS™ Nickel Alloy Plate, Age-hardened Outstanding Corrosion Resistance, High Strength HASTELLOY® C-22HSTM alloy is corrosion-resistant, nickel-chromium-molybdenum alloy which can be heat treated to obtain a strength approximately dou.. |
|||
Tensile Strength, Yield | 827 MPa @Strain 0.200 %, Temperature 816 °C |
120000 psi @Strain 0.200 %, Temperature 1500 °F |
Solution Annealed, AC |
Special Metals UDIMAR® alloy 300 Fe-Ni Maraging Steel UDIMAR® alloy 300 (UNS K93120) is an age-hardenable (maraging) iron-nickel steel combining ultra-high strength, toughness and resistance to crack propagation. The alloy is well suited to applica.. |
|||
Tensile Strength, Yield | 827 MPa @Strain 0.200 %, Time 3600 sec |
120000 psi @Strain 0.200 %, Time 1.00 hour |
Solution Annealed, AC |
Special Metals UDIMAR® alloy 300 Fe-Ni Maraging Steel UDIMAR® alloy 300 (UNS K93120) is an age-hardenable (maraging) iron-nickel steel combining ultra-high strength, toughness and resistance to crack propagation. The alloy is well suited to applica.. |
|||
Tensile Strength, Yield | 827 MPa @Temperature 25.0 °C |
120000 psi @Temperature 77.0 °F |
0°, Dry |
Hexcel® HexPly® 8552 Epoxy Matrix, A193-PW Fiber Information provided by HexCel |
|||
Tensile Strength, Yield | 827 MPa @Temperature -55.0 °C |
120000 psi @Temperature -67.0 °F |
0°, Dry |
Hexcel® HexPly® 8552 Epoxy Matrix, A280-5H Fiber Information provided by HexCel |
|||
Tensile Strength, Yield | 827 MPa @Strain 2.00 %, Temperature 316 °C |
120000 psi @Strain 2.00 %, Temperature 600 °F |
H1150 |
Crucible Steel 15-5 Precipitation Hardening Stainless Steel Crucible 15-5 is a Premium Quality precipitation-hardening stainless steel which is capable of high strength and hardness levels after a relatively simple heat-treatment procedure. This grade is a V.. |
|||
Tensile Strength, Yield | 827 MPa @Strain 2.00 %, Temperature 316 °C |
120000 psi @Strain 2.00 %, Temperature 600 °F |
H1150 |
Crucible Steel 17Cr-4Ni Precipitation Hardening Stainless Steel Crucible 17Cr-4Ni is a precipitation-hardening stainless steel which is capable of a high strength and hardness levels after a relatively simple heat-treatment procedure. This grade is martensitic a.. |
|||
Tensile Strength, Yield | 827 MPa @Strain 2.00 %, Temperature 316 °C |
120000 psi @Strain 2.00 %, Temperature 600 °F |
H1150 |
Crucible Steel 17Cr-4Ni Super-X® Precipitation Hardening Stainless Steel Crucible 17Cr-4Ni is a version of 17CR-4Ni which has been modified to substantially improve machinability and other properties. Patented 17Cr-4Ni Super-X meets industry specifications for 17Cr-4Ni. .. |
|||
Tensile Strength, Yield | 827 MPa @Strain 0.200 % |
120000 psi @Strain 0.200 % |
20.7% Cold Work |
AK Steel NITRONIC® 19-D Duplex Stainless Steel AK Steel NITRONIC® 19D is a stainless steel with a mixed ferrite and austenite structure. This alloy provides high yield strength (65 ksi minimum {448 MPa}),
good drawing and welding characteristi.. |
|||
Tensile Strength, Yield | 827 MPa @Diameter 25.4 mm |
120000 psi @Diameter 1.00 in |
R<sub>p</sub>0.2. bar. 310 HB |
Assab Steels 618 Plastic Mold Material ASSAB 618 is a vacuum-degassed Cr-Ni-Mo-alloy steel which is supplied in the hardened and tempered condition. ASSAB 618 is manufactured to consistently high quality standards with a controlled sulfu.. |
|||
Tensile Strength, Yield | 827 MPa @Diameter 25.4 mm |
120000 psi @Diameter 1.00 in |
R<sub>p</sub>0.2. bar. Hardness: 310 HB |
Assab Steels 718HH Plastic Mold Material IMPAX SUPREME is a premium-quality vacuum-degassed Cr-Ni-Mo-alloyed steel which is supplied in the hardened and tempered condition. IMPAX SUPREME is manufactured to consistently high quality standar.. |