Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 0.30 - 3.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 - 3.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Polymer Resources AC-G25 Acetal Copolymer, 25% Glass Reinforced Process: Molding or ExtrusionNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Polymer Resources Corporation. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Chevron Phillips HiD® 9354 HDPE Natural Pipe Resin
(discontinued **) Resin Type: gas phase linear hexane copolymerApplications: corrugated pipe applicationsInformation provided by Chevron Phillips Chemical Company. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg |
0.30 g/10 min @Load 4.76 lb |
ASTM D1238 |
Reliance Industries Relene D16501 Polyethylene Relene D16501 is a UV stabilized High Density Polyethylene compound with broad molecular weight distributions, suitable for producing cable duct for optic fiber and other general purpose cables. Th.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg |
0.30 g/10 min @Load 4.76 lb |
ASTM D1238 |
Reliance Industries Relene F46003 Polyethylene Relene F46003 is a High Density Polyethylene grade suitable for producing blown parts with superior stiffness and barrier properties. It is recommended for making liners and coextruded film structu.. |
|||
Melt Flow | 0.30 - 0.60 g/10 min | 0.30 - 0.60 g/10 min | ±10% Superior Class, ±18% 1st Class |
Kazanorgsintez 273-385 High Density Polyethylene Composite, Film Grade Production Method: Compositions are achieved by ethylene copolymerization by gaseous-phase method at low pressure using complex catalysts on carrier material. Application: HDPE compositions are .. |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | ASTM D1238 |
LyondellBasell Petrothene® LR732013 High Density Polyethylene (Blow Molding Grade) ApplicationsThe PETROTHENE LR 7320 series of polyethylene resins exhibits an excellent balance of stiffness and environmental stress crack resistance. Typical applications include bottles for bleac.. |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | ASTM D1238 |
Hyosung Topilene B200P PP B200P Applications: Industrial pipesCharacteristics: Chemical resistanceInformation provided by Hyosung Corporation |
|||
Melt Flow | 0.30 - 1.7 g/10 min @Load 2.61 kg, Temperature 190 °C |
0.30 - 1.7 g/10 min @Load 5.75 lb, Temperature 374 °F |
ASTM D1238 |
LG Chemical SEETEC ES440 Ethylene Vinyl Acetate Characteristics: Good Mechanical Properties and Good Optical PropertiesApplications: Agricultural Film, Shoe solesCSA No. 24937-78-8Information provided by LG Chemical |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Inno-Comp INNOPOL® CS 4-8000 Polypropylene Random Copolymer INNOPOL® CS 4-8000 is a polypropylene random copolymer. This grade is available in nature and custom colored form.INNOPOL® CS 4-8000 is highly suitable for pressure pipe manufacturing, includi.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
MBA Polymers HDPE 1107 E Post-consumer recycled fractional melt high density polyethylene Available in standard black.Information provided by MBA Polymers. |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | ISO 1133 |
Iran Petrochemical (PCC) D 50 S Polypropylene Moplen D 50 S is a homopolymer with a high molecular weight and outstanding mechanical properties. The product shows excellent processability in extrusion applications and exhibits excellent long te.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Borealis BorECO™ BA2000 Polypropylene Block Copolymer for Non-Pressure Pipes BorECO™ BA2000 is a high molecular weight, low melt flow rate polypropylene block copolymer with a good balance of mechanical properties. This grade offers superior stiffness while keeping good im.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Borealis Bormed™ LE6601-PH LDPE for Pharmaceutical Blow Molding Bormed LE6601-PH is a LD-polyethylene produced in a high-pressure process intended for blow molding of soft and flexible packages for pharmaceutical products.Bormed LE6601-PH can be used in "blow-fi.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Borealis BorSafe™ HE3495-LS HDPE Compound BorSafe™ HE3495-LS is a bimodal polyethylene compound produced by the advanced Borstar® technology. It's fully stabilized against thermal degradation and the die build-up during extrusion is minim.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Borealis Borstar® HE3410 HDPE for Sewage Pipes Borstar® HE3410 is a bimodal polyethylene compound produced by the advanced Borstar® technology. Well dispersed carbon black gives outstanding UV resistance. Long term stability is ensured by an .. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Borealis Borstar® HE3476-LS Yellow Polyethylene Compound for The Coextrusion of Identifying Stripes On Black HD Pipe for Natural Gas Borstar HE3476-LS is a bimodal, cadmium free, high density polyethylene compound designed for coextrusion of blue identifying stripes. It is fully stabilized against thermal degradation and the die.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Borealis Borstar® HE3497-LS Red-Brown Polyethylene Compound for The Coextrusion of Identifying Stripes On Black HD Pipe for Sewerage Borstar HE3497-LS is a bimodal, cadmium free, high density polyethylene compound designed for coextrusion of blue identifying stripes. It is fully stabilized against thermal degradation and the die.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Borealis RA130E-2491 Polypropylene Random Copolymer RA130E-2491 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is blue colored. Applications: domestic water, heating, relining, plumbing, and industr.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Borealis RA130E-6017 Polypropylene Random Copolymer RA130E-6017 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green colored. Applications: domestic water, heating, relining, plumbing, and indust.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
Condition E; ASTM D1238 |
Formosa Plastics Formolene® HB5202B2 Sheet and Thermoforming HDPE High Density Polyethylene Hexene CopolymerApplications: Containers for bleach, detergents, chemicals; Molded or formed industrial housings, shrouds and tanks.Formolene HB5202B2 is designed for appli.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Borealis Borstar® HE3492-LS Yellow-Orange High Density Polyethylene for Natural Gas Pipes Borstar HE3492-LS is a yellow-orange, cadmium free, high density polyethylene compound classified as a MRS 10.0 material (PE100) produced with the advanced Borstar technology. It includes a combina.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg |
0.30 g/10 min @Load 11.0 lb |
ISO 1133 |
Total Xsene® XS10 OS HDPE, pipe FINATHENE® XS 10 OS is a cadmium-free orange stripe compound designed to be used in combination with the black PE 100 grade FINATHENE® XS 10 B for gas pipe application. The base polymer of FINATHE.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
ExxonMobil Enable™ 27-03CH Metallocene Polyethylene Resin (European Grade) Product Description: Enable 27-03HH is a metallocene ethylene-hexene copolymers. Enable mPE resins offer an outstanding balance between processing and film properties, including tensile, impact and .. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
ExxonMobil Enable™ 27-03HH Metallocene Polyethylene Resin Product Description: Enable 23-05 resins are metallocene ethylene-hexane copolymers. Enable mPE resins offer an outstanding balance between processing and film properties, including tensile, impact .. |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | ExxonMobil Method |
ExxonMobil LD 141.87 Shrink Film Resin LD 141.87 is a vinyl acetate copolymer film resin with very good toughness and shrink properties. Applications include Medium duty shrink wrap and Heavy duty bags.Information provided by ExxonMobil.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 220 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 428 °F |
ASTM D1238 |
Diapolyacrylate Shinko-Lac® U400B Transparent ABS Shinko-Lac® is a registered trademark of Diapolyacrylate Company Limited. Information provided by Dayson Polymers. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg |
0.30 g/10 min @Load 11.0 lb |
ISO 1133 |
Total Xsene® XS10 Orange YCF HDPE, pipe FINATHENE® XS 10 ORANGE YCF is a high density polyethylene based on C6 hexene as co-monomer and is produced by the Fina Double Loop Technology™. FINATHENE® XS 10 ORANGE YCF is a high performance .. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
SCG Chemicals EL-Lene™ H6140B High Density Polyethylene Blow Molding Key Characteristics:Good processabilityHigh stiffnessGood environmental stress cracking resistance (ESCR)High compressive and impact strengthExcellent appearanceOdorlessSafe for food contactGood pri.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
ExxonMobil Paxon™ AM55-003 Blow Molding Resin
(discontinued **) AM55-003 is a blow molding grade high density polyethylene copolymer containing an excellent antistat additive. It provides a good combination of stiffness and stress crack resistance. AM55-003 co.. |