Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.916 - 0.920 g/cc | 0.0331 - 0.0332 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 4117N (18401) Linear Low Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.916 - 0.920 g/cc | 0.0331 - 0.0332 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 4118Q (18403) Linear Low Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.916 - 0.920 g/cc | 0.0331 - 0.0332 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 5118P (18602) Linear Low Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.916 - 0.920 g/cc | 0.0331 - 0.0332 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 5118Q (18603) Linear Low Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | carrier resin value; ASTM D-1505 |
Chevron Phillips MarFlex® ER3343 Polyethylene; Masterbatch
(discontinued **) Metallocene polyethylene slip masterbatch. This erucamide slip concentrate with its mLLDPE carrier is tailored for use with mPact™ resins in blown film applications that require: Reduced COFExcel.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D4883 |
Chevron Phillips Dynex™ D5081 Enhanced LLDPE Blown Film Resin
(discontinued **) Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: superior dart impact, optical, hot-tack and heat seal properties, good drawdown, ca.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Global SU-1018 Low Density Polyethylene, Injection Molding Grade
(discontinued **) Description-transparency, high toughness, flexibility, high impact strength, good chemical resistanceApplications-packagingMeets FDA requirements as listed in food additives regulation 21 CFR 117.15.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D 792 |
NOVA Chemicals Surpass® FPs016-C Octene sLLDPE Film Resin FPs016-C complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food.NOVA Chem.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D792 |
LyondellBasell Montell 16501F6 Butene LLDPE Key Features: butene LLDPE resins for film extrusion applications, easy processing, low gels, good strength, low slip, high antiblockApplications: can liners and trash bags, blends, thin filmsMeets .. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D792 |
LyondellBasell Montell 16501F8 Butene LLDPE Key Features: butene LLDPE resins for film extrusion applications, easy processing, low gels, good strength, medium slip, high antiblockApplications: can liners and trash bags, blends, thin filmsMee.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D792 |
LyondellBasell Montell 16502F3 Butene LLDPE Key Features: butene LLDPE resins for film extrusion applications, easy processing, low gels, good strength, no slip, no antiblockApplications: can liners and trash bags, blends, thin filmsMeets FDA.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505-98 |
Ipiranga Petrochem LB 0216 LLDP IPQ produces Linear Low Density Polyethylene (LLDPE) for use by plastics molding industry segments that employ extrusion processes in the manufacturing of films destined for producing bobbins and ba.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Iran Petrochemical (PCC) 16503 Linear Low Density Polyethylene 16503 is a LLDPE for general purpose cast stretch film grade. The ease of processing and the low gels make 16503 well suited for production of general purpose monolayer or multilayer cast stretch fi.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D792 |
Micropol DD Polyethylene powders for cleaning products Information provided by Micropol Limited |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Micropol L7 Low density polyethylene rotational molding powder Has a high gloss finish, and outstanding toughness. Information provided by Micropol Limited |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ISO 1183 |
MTM Plastics Purpolen® PP Polypropylene Regrind Purpolen® is a sorted regrind material suited to the production of demanding end user products. Extrusion and injection molding grades are available in many colors. The basis of our Purpolen® .. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Chevron Phillips MarFlex® D143FK Metallocene Linear Low Density Polyethylene, Blown Film This mLLDPE is tailored for applications that require:Excellent clarityExcellent glossExcellent toughnessExcellent heat sealTypical blown film applications include:Seal layer in coextrusionsHeavy du.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Chevron Phillips MarFlex® D143FK Metallocene Linear Low Density Polyethylene, Blown Film This mLLDPE is tailored for applications that require:Excellent clarityExcellent glossExcellent toughnessExcellent heat sealTypical blown film applications include:Seal layer in coextrusionsHeavy du.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ExxonMobil method |
ExxonMobil LDPE LD 250 Low Density Polyethylene Resin (European Grade) Product Description: LD 250 is an LDPE extrusion coating grade, especially designed for low speed extrusion coating applications providingvery low neck-in characteristicsgood heat sealing properties.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ExxonMobil method |
ExxonMobil LDPE LD 251 Low Density Polyethylene Resin (European Grade) Product Description: LD 251 is an LDPE extrusion coating grade, offering:low neck-in excellent heat sealablity (ie high seal speeds and/or seal temperatures mostly required in high speed form-fill a.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | |
Dow Elite® 5400 Linear Low Density Polyethylene 5400 enhanced polyethylene resin is a copolymer produced via INSITE technology from Dow Plastics. It offers extremely high impact resistance, combined with excellent tear, tensile, and optical prop.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D792 |
Dow ELITE™ 5230G Enhanced Polyethylene Resin ™ 5230G is produced via INSITE™ Technology from Dow Plastics. It offers high impact strength and good puncture resistance at moderate stretch levels for irregularly shaped loads. In addition, th.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D792 |
Dow ELITE™ 5400G Enhanced Polyethylene Resin ™ 5400G is a copolymer produced via INSITE™ Technology from Dow Plastics. It offers a unique combination of low seal initiation, moderate stiffness and low blocking tendencies for good performanc.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | |
Dow LDPE 4012 Low Density Polyethylene, Extrusion Coating Grade DOW Polyethylene 4012 extrusion coating resin is used for thin coatings in applications such as sugar pouches, ice cream bar covers, easy tear packages, and freezer papers. It is designed to be run .. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | |
Dow LDPE 4012M Low Density Polyethylene DOW LDPE 4012M resin is a broad molecular weight distribution homopolymer designed to provide good impact strength, excellent flexibility and high stress crack resistance for housewares, toys and ge.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Braskem LH 118 LLDPE Blown Film Extrusion Polyethylene Description: LH118 is a Linear Low Density Polyethylene, copolymer of hexene-1, produced by Spherilene process. Developed for blown film extrusion in blends with polyethylenes. Films obtained with t.. |
|||
Density | 0.916 g/cc @Temperature 23.0 °C |
0.0331 lb/in³ @Temperature 73.4 °F |
ISO 1183 |
Arkema Group OREVAC® 18365 Maleic Anhydride Modified Polyethylene OREVAC® 18365 is anhydride modified polyethylene. It is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. OREVAC® 1.. |
|||
Density | 0.916 - 0.944 g/cc | 0.0331 - 0.0341 lb/in³ | Average value: 0.922 g/cc Grade Count:20 |
Overview of materials for Linear Low Density Polyethylene (LLDPE), Extrusion Grade This property data is a summary of similar materials in the MatWeb database for the category "Linear Low Density Polyethylene (LLDPE), Extrusion Grade". Each property range of values reported is min.. |
|||
Density | 0.916 - 0.925 g/cc | 0.0331 - 0.0334 lb/in³ | Average value: 0.920 g/cc Grade Count:34 |
Overview of materials for Linear Low Density Polyethylene (LLDPE)/Octene, Film This property data is a summary of similar materials in the MatWeb database for the category "Linear Low Density Polyethylene (LLDPE)/Octene, Film". Each property range of values reported is minimum.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D4883 |
Chevron Phillips Dynex™ D508D7 Enhanced LLDPE Blown Film Resin
(discontinued **) Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: superior dart impact, optical, hot-tack and heat seal properties, good drawdown, ca.. |