Zyvex Performance Materials Aroply™ 350 Nano-Engineered Composite Film Adhesive

Category	Polymer , Thermoset , Carbon Fiber/Thermoset Composite
Manufacturer	Zyvex Performance Materials (ZPM)
Trade Name	Aroply™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Zyvex Performance Materials Aroply™ 350 Nano-Engineered Composite Film Adhesive.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Aroply™ 350 Film Adhesive is a versatile, heat curing carbon-nanotube modified epoxy structural film adhesive available in a variety of film weights on a supported carrier. Cured adhesive characteristics are designated by exceptionally high shear and peel strengths on a variety of substrates at temperatures up to 350F. This film adhesive is designed for both solid panel and honeycomb constructions. Aroply™ 350 contains an optimum level of carbon nanotubes for additional toughness and enhanced mechanical properties. The carbon nanotubes use molecular dispersion technology to ensure enhancements are evenly distributed throughout the adhesive. Features: Semi-tacky for adherence to desired location Long Open Time: 30 days in standard shop conditions Adaptable to many processes

Physical Properties	Metric	English	Comments
Viscosity	1000 cP @Temperature 120 °C	1000 cP @Temperature 248 °F	Rheology, 2°C/min
	1100 cP @Temperature 160 °C	1100 cP @Temperature 320 °F	Rheology, 2°C/min
	8000 cP @Temperature 80.0 °C	8000 cP @Temperature 176 °F	Rheology, 2°C/min
	800000 cP @Temperature 40.0 °C	800000 cP @Temperature 104 °F	Rheology, 2°C/min
	1.10e+7 cP @Temperature 175 °C	1.10e+7 cP @Temperature 347 °F	Rheology, 2°C/min

Mechanical Properties	Metric	English	Comments
Tensile Strength	6.89 MPa	1000 psi	Flatwise, 90 min @ 350°F, Spring Clamp Pressure, Abraded 6061-T6 Untreated; ASTM C297M
Shear Strength	10.34 MPa @Temperature 177 °C	1500 psi @Temperature 350 °F	2 hr soak, 90 min @ 350°F, Spring Clamp Pressure, FPL Acid Etched 6061-T6; ASTM D1002
	20.68 MPa @Temperature 177 °C	3000 psi @Temperature 350 °F	90 min @ 350°F, Spring Clamp Pressure, FPL Acid Etched 6061-T6; ASTM D1002
	26.20 MPa @Temperature 121 °C	3800 psi @Temperature 250 °F	90 min @ 350°F, Spring Clamp Pressure, FPL Acid Etched 6061-T6; ASTM D1002
	28.96 MPa @Temperature 21.1 °C	4200 psi @Temperature 70.0 °F	90 min @ 350°F, Spring Clamp Pressure, FPL Acid Etched 6061-T6; ASTM D1002
Peel Strength	2.98 kN/m @Temperature 21.1 °C	17.0 pli @Temperature 70.0 °F	T-Peel, 90 min @ 350°F, Spring Clamp Pressure, FPL Acid Etched 6061-T6; ASTM D1876
	4.56 kN/m @Temperature 121 °C	26.0 pli @Temperature 250 °F	T-Peel, 90 min @ 350°F, Spring Clamp Pressure, FPL Acid Etched 6061-T6; ASTM D1876
	5.61 kN/m @Temperature 177 °C	32.0 pli @Temperature 350 °F	Roller Peel, 90 min @ 350°F, Spring Clamp Pressure, FPL Acid Etched 6061-T6; ASTM D3167
	6.49 kN/m @Temperature 21.1 °C	37.0 pli @Temperature 70.0 °F	Roller Peel, 90 min @ 350°F, Spring Clamp Pressure, FPL Acid Etched 6061-T6; ASTM D3167
	7.54 kN/m @Temperature 121 °C	43.0 pli @Temperature 250 °F	Roller Peel, 90 min @ 350°F, Spring Clamp Pressure, FPL Acid Etched 6061-T6; ASTM D3167

Descriptive Properties	Value	Comments
Drum Peel	19.8 in-lb/in	Tool Side Up, 2 hrs @ 250°F, 30 psi, 6061 T6 Abraded, 1” Nomex 3 lb core 1/8” cell
	20.5 in-lb/in	Tool Side Down, 2 hrs @ 250°F, 30 psi, 6061 T6 Abraded, 1” Nomex 3 lb core 1/8” cell
Load to Failure	606 lbf	5 lb Core, 6 hrs @ 220°F, Vacuum Bag
	669 lbf	8 lb Core, 6 hrs @ 220°F, Vacuum Bag

Users viewing this material also viewed the following: