Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

UBE UPIMOL® R Polyimide Shape

Category Polymer , Thermoset , Polyimide, TS
Manufacturer UBE
Trade Name UPIMOL®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF UBE UPIMOL® R Polyimide Shape.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: Ube's UPIMOL is an exceptionally heat-resistant polyimide Shape. This product has the same molecular structure as UPILEX, an ultra-high heat-resistant polyimide film developed by Ube, produced through polycondensation of biphenyltetracarboxylic dianhydride and diamine. Depending on the type of application, there are two types of UPIMOL available. One is UPIMOL-R for general use and the other is UPIMOL-S for high heat-resistant use.While exhibiting a number of excellent properties over a wide temperature range, of special note are UPIMOL's exceptional mechanical, thermal and chemical properties at high temperatures. Since UPIMOL has been shown to satisfy even the exacting requirements of the ceramics industry, its applications are extremely wide-ranging, the major uses including:Electrical and Electronic EquipmentIC sockets for semiconductor testing machine handlersCollet for IC mounterFrictional parts such as copier bearingsWire guides for wire dot printersIndustrial EquipmentPiston rings for compressors, etc.Thrust washers for gears, etc.Radiation and chemical resistant pipe sealings and other such parts.Aerospace-Related EquipmentVane bushings for jet enginesSpline couplings for aircraftInsulating parts, spacers, etc, for artificial satellites.Information provided by UBE.
Physical Properties Metric English Comments
Water Absorption 0.46 %
0.46 %
(48Hr); ASTM D-570
Water Absorption at Saturation 1.3 %
1.3 %
ASTM D-570
Mechanical Properties Metric English Comments
Hardness, Rockwell M 114
114
ASTM D-785
Tensile Strength, Ultimate 116 MPa
16800 psi
ASTM D-638
41.2 MPa

@Temperature 260 °C
5980 psi

@Temperature 500 °F
ASTM D-638
Elongation at Yield 5.0 %
5.0 %
ASTM D-638
6.0 %

@Temperature 260 °C
6.0 %

@Temperature 500 °F
ASTM D-638
Flexural Yield Strength 161 MPa
23300 psi
ASTM D790
58.8 MPa

@Temperature 260 °C
8530 psi

@Temperature 500 °F
ASTM D790
Flexural Modulus 4.17 GPa
604 ksi
ASTM D790
2.09 GPa

@Temperature 260 °C
303 ksi

@Temperature 500 °F
ASTM D790
Compressive Strength 26.5 MPa
3840 psi
1% Deformation; ASTM D-695
Compressive Modulus 2.60 GPa
377 ksi
23°C; ASTM D695
Izod Impact, Notched 0.745 J/cm

@Temperature 23.0 °C
1.40 ft-lb/in

@Temperature 73.4 °F
ASTM D-256
Izod Impact, Unnotched 9.20 J/cm
17.2 ft-lb/in
ASTM D-256
Coefficient of Friction, Dynamic 0.25
0.25
0.5m/sec, 5 kgf; S45C
Limiting Pressure Velocity 1.72 MPa-m/sec
49100 psi-ft/min
0.5 m/sec; S45C
Taber Abrasion, mg/1000 Cycles 14.7
14.7
CS-17, 1000 g; ASTM D-1044
Abrasion 3.8
3.8
mg loss, 0.5m/sec, 5 kgf; S45C
Thermal Properties Metric English Comments
CTE, linear 36.2 µm/m-°C

@Temperature 20.0 - 100 °C
20.1 µin/in-°F

@Temperature 68.0 - 212 °F
ASTM E-233
55.2 µm/m-°C

@Temperature 20.0 - 250 °C
30.7 µin/in-°F

@Temperature 68.0 - 482 °F
ASTM E-233
63.5 µm/m-°C

@Temperature 100 - 200 °C
35.3 µin/in-°F

@Temperature 212 - 392 °F
ASTM E-233
82.5 µm/m-°C

@Temperature 200 - 300 °C
45.8 µin/in-°F

@Temperature 392 - 572 °F
ASTM E-233
Specific Heat Capacity 1.046 J/g-°C
0.2500 BTU/lb-°F
Thermal Conductivity 0.393 W/m-K
2.73 BTU-in/hr-ft²-°F
Deflection Temperature at 0.46 MPa (66 psi) 360 °C
680 °F
ASTM D-648
Decomposition Temperature 548 °C
1020 °F
10% Weight Reduction
Electrical Properties Metric English Comments
Volume Resistivity 1.80e+16 ohm-cm
1.80e+16 ohm-cm
ASTM D-257
Surface Resistance 9.40e+16 ohm
9.40e+16 ohm
ASTM D-257
Dielectric Constant 3.59

@Frequency 1000 Hz
3.59

@Frequency 1000 Hz
ASTM D150
Dielectric Strength 18.0 kV/mm

@Thickness 2.00 mm
457 kV/in

@Thickness 0.0787 in
ASTM D149
Dissipation Factor 0.0012
0.0012
ASTM D-150
Arc Resistance 124 sec
124 sec
23°C; ASTM D-495
Descriptive Properties Value Comments
Compressive Creep 0.0083
150°C, 175kg/cm^2 (Stress for 100 hrs)
Thermal Weight Reduction (in Air) 0.002
300°C x 18H
0.017
400°C x 18H
Copyright © lookpolymers.com All Rights Reserved