- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoseal KLINGERSIL® C-4300 General Application Gasketing
Thermoseal KLINGERSIL® C-4300 General Application Gasketing
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Thermoseal Inc. |
| Trade Name | KLINGERSIL® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Thermoseal KLINGERSIL® C-4300 General Application Gasketing.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Synthetic FiberNitrile BinderGood SealabilityGood Chemical ResistanceGeneral Purpose SheetInformation provided by Thermoseal Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.60 g/cc | 0.0578 lb/in³ | ASTM F1315 |
| Thickness | 1588 microns | 62.52 mil | Thickness tested |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 18.0 kV/mm | 457 kV/in | ASTM D149-95a |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Green or White or Black | (Top/Bottom) |
| Compressibility | 10 percent | ASTM F36J |
| Creep Relaxation | 25 percent | 1/32", ASTM F38B |
| Gas Permeability | <0.5 ml/min | DIN 3535/6 |
| Klinger Hot Compression Test | 10 percent | Initial, Thickness Decrease 73°F (23°C) |
| 25 percent | Additional, Thickness Decrease 572°F (300°C) | |
| Leachable Chloride Content | 200 ppm | FSA Method (Typical) |
| Recovery | >50 percent | ASTM F36J |
| Sealability | <0.25 ml/hr | 1/32", ASTM F37A |
| Thickness Increase | 0-5% | ASTM F146 after immersion in ASTM Oil 1, 5h/300°F (149°C) |
| 0-5% | ASTM Oil IRM903, 5h/300°F (149°C) | |
| 0-5% | ASTM Fuel A, 5h/73°F (23°C) | |
| 0-5% | ASTM Fuel B, 5h/73°F (23°C) | |
| Weight Increase | <10% | ASTM F146 after immersion in Fuel B 5h/73°F (23°C) |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 6 GF 40 Polyamide 6, 40% Glass Fiber
- Plastcom SLOVAMID 66 BT LS PA66, basic type
- Polymax® Maxelast® D6895 TPE, Extruded
- Nilit FRIANYL A63 S Nylon 6.6 for injection molding
- Global PP-1100-NK Polypropylene Homopolymer
- Lanxess Pocan® S 1506 901510 PBT
- Vicone High Performance Rubber VicoSil™ 159DLK-RD High Performance Silicone Rubber
- DuPont Performance Polymers Zytel® ST800HSL BK152 Nylon 66 (Unverified Data**)
- Arlon 0.015" (0.381 mm) Flexible Heater Silicone with Fiberglass Substrate (51946C015)
Copyright © lookpolymers.com All Rights Reserved