- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Flexible Grade
- Teknor Apex APEX® 84128 Polyvinyl Chloride, Flexible
Teknor Apex APEX® 84128 Polyvinyl Chloride, Flexible
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Flexible Grade , PVC, Wire and Cable Grade |
| Manufacturer | Teknor Apex Company |
| Trade Name | APEX® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Teknor Apex APEX® 84128 Polyvinyl Chloride, Flexible.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Notes: 80°C Insulation; RoHS Compliant Uses: Wire and Cable Applications Forms: PelletsInformation Provided by Teknor Apex
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.38 g/cc | 1.38 g/cc | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore C | 89 | 89 | 10 seconds; ASTM D2240 |
| Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D638 |
| Elongation at Break | 300 % | 300 % | ASTM D638 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous Use; ASTM D794 |
| Brittleness Temperature | -21.0 °C | -5.80 °F | ASTM D746 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 5.80e+13 ohm-cm | 5.80e+13 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.23 @Frequency 1.00e+6 Hz |
3.23 @Frequency 1.00e+6 Hz |
ASTM D150 |
| 4.58 @Frequency 1000 Hz |
4.58 @Frequency 1000 Hz |
ASTM D150 | |
| Dissipation Factor | 0.078 @Frequency 1000 Hz |
0.078 @Frequency 1000 Hz |
ASTM D150 |
| 0.082 @Frequency 1.00e+6 Hz |
0.082 @Frequency 1.00e+6 Hz |
ASTM D150 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Opaque |
Users viewing this material also viewed the following:
- Nye Lubricants 186 (SO) Synthetic Oil
- Total Finathene® LL 6010 FH 18P LLDPE film (discontinued **)
- Fine Organics FINALUX G 200 Lubricant Additive
- Mapal Plastics Maplon Type D Polypropylene Sheet
- Ineos ABS Lustran® ABS 377 Plating, Injection Molding Grade
- Zircar Ceramics IB-100A Alumina Bubble
- Dow Buna® SB 1723 Cold polymerized Emulsion Styrene Butadiene Rubber (E-SBR)
- Arlon CP-375CR Silicone Rubber
- SABIC Innovative Plastics Valox® V3900WX PBT+PC (Europe-Africa-Middle East)
Copyright © lookpolymers.com All Rights Reserved