- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyketone
- Polyetheretherketone (PEEK)
- Technetics Group Amicon™ PEEK 30% Carbon (Unverified Data**)
Technetics Group Amicon™ PEEK 30% Carbon (Unverified Data**)
| Category | Polymer , Thermoplastic , Polyketone , Polyetheretherketone (PEEK) |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Technetics Group Amicon™ PEEK 30% Carbon
(Unverified Data**).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Technetics Group (formerly Plastomer Technologies)
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.41 g/cc | 1.41 g/cc | ASTM D792 |
| Water Absorption | 0.060 % | 0.060 % | 24 hours; ASTM D570 (2) |
| Water Absorption at Saturation | 0.30 % | 0.30 % | ASTM D570 (2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 131 MPa | 19000 psi | ASTM D638 |
| Elongation at Break | 5.0 % | 5.0 % | ASTM D638 |
| Modulus of Elasticity | 7.58 GPa | 1100 ksi | ASTM D638 |
| Compressive Strength | 200 MPa | 29000 psi | ASTM D695 |
| Izod Impact, Notched | 0.550 J/cm | 1.03 ft-lb/in | ASTM D256 type "A" |
| Coefficient of Friction | 0.20 | 0.20 | ASTM PTM 55007 |
| K (wear) Factor | 302 x 10-8 mm³/N-M | 150 x 10-10 in³-min/ft-lb-hr | QTM 55010 |
| Limiting Pressure Velocity | 0.876 MPa-m/sec | 25000 psi-ft/min | 4:1 safety factor |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 18.0 µm/m-°C @Temperature 100 °C |
10.0 µin/in-°F @Temperature 212 °F |
ASTM E-831 (TMA) |
| Maximum Service Temperature, Air | 250 °C | 482 °F | |
| Flammability, UL94 | V-0 @Thickness 3.17 mm |
V-0 @Thickness 0.125 in |
ASTM UL-94 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 1.26 kV/mm | 32.0 kV/in | ASTM D149 |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 6 T 10 PA6, mineral filling
- SABIC Innovative Plastics Lexan® HP8REU PC (Europe-Africa-Middle East)
- SABIC Innovative Plastics LNP KONDUIT PTF2BXXX PA 6 (Asia Pacific)
- Fiberfil® FPI-15 BK Nylon 6, 15% Glass Reinforced, post industrial
- I. Stern PS2110 General Purpose Crystal Polystyrene
- SABIC Innovative Plastics LNP VERTON RV00AES PA 66 (Europe-Africa-Middle East)
- 3M Cushion-Mount™ E1040H Plus Plate Mounting Tapes with Easy Mount Adhesive and High Plateside Adhesion
- Ametek AM 388™ Alloy (UNS C72650) TM04
- 3M Scotch-Weld™ AC12 Instant Adhesive Activator
Copyright © lookpolymers.com All Rights Reserved