- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyetherimide (PEI)
- Techmer ES Electrablend® PEI 04008 MB
Techmer ES Electrablend® PEI 04008 MB
| Category | Polymer , Thermoplastic , Polyetherimide (PEI) |
| Manufacturer | Techmer ES |
| Trade Name | Electrablend® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES Electrablend® PEI 04008 MB.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsFeatures: Conductive and CopolymerInformation provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.42 g/cc | 0.0513 lb/in³ | ASTM D792 |
| Water Absorption | 1.1 % @Time 86400 sec |
1.1 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.018 cm/cm @Thickness 3.17 mm |
0.018 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 100 | 100 | ASTM D785 |
| Tensile Strength, Yield | 58.6 MPa | 8500 psi | ASTM D638 |
| Elongation at Break | 30 % | 30 % | ASTM D638 |
| Flexural Strength | 81.4 MPa | 11800 psi | ASTM D790 |
| Flexural Modulus | 2.76 GPa | 400 ksi | ASTM D790 |
| Izod Impact, Notched | 0.587 J/cm @Thickness 3.17 mm |
1.10 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 21.6 µm/m-°C | 12.0 µin/in-°F | ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 169 °C | 336 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 108 °C | 226 °F | Unannealed; ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.0 - 100 ohm-cm | 1.0 - 100 ohm-cm | ASTM D257 |
| Surface Resistance | 1.0 - 100 ohm | 1.0 - 100 ohm | ASTM D257 |
Users viewing this material also viewed the following:
- Polymax® Maxelast® N8950 TPE, Nylon Overmold
- PEAK Werkstoff DISPAL S260 Aluminum Alloy, AlSi25Cu4Mg, Condition F
- TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 20 PHR Polyfil HG90 Filler
- Zircar Ceramics HITAC-4 High Alumina Refractory Adhesive
- Trelleborg AEM Eccospheres® SI-350 Sodium Borosilicate Glass Microspheres
- A. Schulman POLYFLAM™ FLP 3714 20% Glass Filled HDPE
- Diamond Polymers ASA TW-18B1
- Entec Hypro™ PPC-GF40 Natural Impact Polypropylene, 40% Glass Reinforced
- Arlon 54B12R006 Silicone Rubber/Fiberglass Laminate
- 3M Envision™ 3635-70 Diffuser Film
Copyright © lookpolymers.com All Rights Reserved