TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 60 PHR Hi-Sil 243 LD Filler

Category	Polymer , Thermoset , Polyester, TS , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 60 PHR Hi-Sil 243 LD Filler.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

MILLATHANE HT is a polyester millable polyurethane which has the ability to withstand elevated temperatures. Polyurethanes have been known for their excellent resistance to abrasion, impact, tear strength, oil and fuel resistance, and ozone resistance. The life expectancy of urethane is often 5 times longer than other elastomers, thus saving material costs and downtime expense. One shortcoming of polyurethanes is loss of physical properties at temperatures over 180°F (82°C). MILLATHANE HT has overcome this weakness.FormulationMillathane HT100.0Zinc Stearate0.5MBTS4.0MBT2.0THANECURE® ZM1.0Sulfur1.5Hi-Sil 243 LD60All information provided by TSE Industries

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	91	91
Tensile Strength, Yield	22.15 MPa	3213 psi
Elongation at Yield	427 %	427 %
100% Modulus	0.00598 GPa	0.867 ksi
200% Modulus	0.01116 GPa	1.618 ksi
300% Modulus	0.01606 GPa	2.329 ksi
Tear Strength	70.5 kN/m	402 pli	Die C
Compression Set	64 % @Temperature 70.0 °C, Time 79200 sec	64 % @Temperature 158 °F, Time 22.0 hour

Processing Properties	Metric	English	Comments
Cure Time	28.0 min @Temperature 154 °C	0.467 hour @Temperature 310 °F	Press cured

Users viewing this material also viewed the following: