Sumitomo Bakelite North America 52-70-70-VO-P Short-Glass Reinforced Diallyl Phthalate

Category	Polymer , Thermoset , Diallyl Phthalate (DAP) , Diallyl Phthalate (DAP) Molding Compound, Short Glass Fiber Filled , Filled/Reinforced Thermoset
Manufacturer	Sumitomo Bakelite North America
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Sumitomo Bakelite North America 52-70-70-VO-P Short-Glass Reinforced Diallyl Phthalate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ortho Resin Isomer (DAP). Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Conforms with the requirements of ASTM D5948 Type SDG-F.Information provided by Sumitomo Bak North America, Inc.

Physical Properties	Metric	English	Comments
Density	1.91 g/cc	0.0690 lb/inÂ³	ASTM D792
Apparent Bulk Density	0.750 g/cc	0.0271 lb/inÂ³
Water Absorption	0.25 %	0.25 %	48 hours, 50Â°C. ASTM D570
Linear Mold Shrinkage	0.0020 - 0.0040 cm/cm	0.0020 - 0.0040 in/in	Compression Molding. ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	75.0 MPa	10900 psi	ASTM D638
Flexural Yield Strength	124 MPa	18000 psi	ASTM D790
Flexural Modulus	11.7 GPa	1700 ksi	ASTM D790
Compressive Yield Strength	150 MPa	21800 psi	ASTM D695
Izod Impact, Notched	0.320 J/cm	0.599 ft-lb/in	ASTM D256A

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	21.0 Âµm/m-Â°C @Temperature 20.0 Â°C	11.7 Âµin/in-Â°F @Temperature 68.0 Â°F	ASTM D696
Maximum Service Temperature, Air	130 Â°C	266 Â°F	UL temperature Index, UL 746B
Deflection Temperature at 1.8 MPa (264 psi)	>= 280 Â°C	>= 536 Â°F	ASTM D648A
UL RTI, Electrical	130 Â°C	266 Â°F	UL temperature Index, UL 746B
UL RTI, Mechanical with Impact	130 Â°C	266 Â°F	UL temperature Index, UL 746B
UL RTI, Mechanical without Impact	130 Â°C	266 Â°F	UL temperature Index, UL 746B
Flammability, UL94	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in
	V-0 @Thickness 3.20 mm	V-0 @Thickness 0.126 in

Electrical Properties	Metric	English	Comments
Dielectric Constant	3.5 @Frequency 1e+6 Hz	3.5 @Frequency 1e+6 Hz	Wet
Dielectric Strength	13.8 kV/mm	351 kV/in	Wet, step-by-step. ASTM D149
Dissipation Factor	0.014 @Frequency 1e+6 Hz	0.014 @Frequency 1e+6 Hz	Wet; ASTM D150
Arc Resistance	130 sec	130 sec	ASTM D495
Comparative Tracking Index	>= 600 V	>= 600 V	ASTM D3638 (IEC 112)

Processing Properties	Metric	English	Comments
Processing Temperature	160 - 180 Â°C	320 - 356 Â°F	Mold temperature

Users viewing this material also viewed the following: