- HOME
- POLYMER SEARCH
- Thermoset
- Filled/Reinforced Thermoset
- Diallyl Phthalate (DAP) Molding Compound, Short Glass Fiber Filled
- Sumitomo Bakelite North America 2-530 Short-Glass Reinforced Diallyl Phthalate
Sumitomo Bakelite North America 2-530 Short-Glass Reinforced Diallyl Phthalate
| Category | Polymer , Thermoset , Diallyl Phthalate (DAP) , Diallyl Phthalate (DAP) Molding Compound, Short Glass Fiber Filled , Filled/Reinforced Thermoset |
| Manufacturer | Sumitomo Bakelite North America |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sumitomo Bakelite North America 2-530 Short-Glass Reinforced Diallyl Phthalate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Isophthalate DAP Resin Isomer. Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Information provided by Sumitomo Bak North America, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.490 g/cc | 0.0177 lb/in³ | |
| Water Absorption | 0.35 % | 0.35 % | 48 hours, 50°C. ASTM D570 |
| Linear Mold Shrinkage | 0.0010 - 0.0040 cm/cm | 0.0010 - 0.0040 in/in | Compression Molding. ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 69.0 MPa | 10000 psi | ASTM D638 |
| Flexural Yield Strength | 131 MPa | 19000 psi | ASTM D790 |
| Flexural Modulus | 13.8 GPa | 2000 ksi | ASTM D790 |
| Compressive Yield Strength | 152 MPa | 22000 psi | ASTM D695 |
| Izod Impact, Notched | 1.60 J/cm | 3.00 ft-lb/in | ASTM D256A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 15.0 µm/m-°C @Temperature 20.0 °C |
8.33 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 288 °C | 550 °F | ASTM D648A |
| Oxygen Index | 25 % | 25 % | ASTM D2863 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 3.6 @Frequency 1e+6 Hz |
3.6 @Frequency 1e+6 Hz |
Wet |
| 3.8 @Frequency 1000 Hz |
3.8 @Frequency 1000 Hz |
Wet | |
| Dielectric Strength | 15.0 kV/mm | 381 kV/in | Wet, step-by-step. ASTM D149 |
| 16.0 kV/mm | 406 kV/in | Wet, short term. ASTM D149 | |
| Dissipation Factor | 0.010 @Frequency 1000 Hz |
0.010 @Frequency 1000 Hz |
Wet; ASTM D150 |
| 0.019 @Frequency 1e+6 Hz |
0.019 @Frequency 1e+6 Hz |
Wet; ASTM D150 | |
| Arc Resistance | 135 sec | 135 sec | ASTM D495 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 160 - 180 °C | 320 - 356 °F | Mold temperature |
Users viewing this material also viewed the following:
- Multibase Multi-Flex® TPE A 7150 BLK
- Victrex® Vicote® F817 Polyetheretherketone (PEEK) Liquid Dispersion, Enhanced Adhesion Grade
- LG Chemical LUMAX HF-5008 High Flow PBT, Dimensional Stability
- Johnson Matthey JM A-Core Soft Solder Flux
- Teknor Apex APEX® 153 Polyvinyl Chloride Compound
- SK Chemicals SKYTHANE® S395A Polyester Based Thermoplastic Polyurethane Elastomer
- Teknor Apex Sarlink® 3490N Thermoplastic Elastomer
- A. Schulman COMTUF® 464 Glass Reinforced Impact Modified PBT Alloy
- TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 70 PHR N550 (FEF) Filler
Copyright © lookpolymers.com All Rights Reserved