- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Crosslinkable
- Solvay Specialty Polymers Polidan® T/A-HF Polyethylene, Crosslinked (XLPE)
Solvay Specialty Polymers Polidan® T/A-HF Polyethylene, Crosslinked (XLPE)
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Crosslinkable |
| Manufacturer | Solvay Specialty Polymers |
| Trade Name | Polidan® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Polidan® T/A-HF Polyethylene, Crosslinked (XLPE).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
POLIDAN® T/A-HF is a silane crosslinkable PE compound which is used together with a catalyst masterbatch to accelerate the crosslinking reaction. It is used for flexible crosslinkable pipes.Features: Crosslinkable; Good Processability; High DensityUses: Piping; Plumbing Parts; Potable Water ApplicationsAdditional Properties: Extruder Screw Compression Ratio - >2.5:1; Extruder Screw L/D Ratio - 25:1 to 30:1; Gel Content - EN 579 > 65 %; Head Temperature - 200 °CInformation provided by Solvay Specialty Polymers.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.944 g/cc | 0.0341 lb/in³ | ASTM D792 |
| Melt Flow | 0.50 g/10 min | 0.50 g/10 min | ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | >= 20.0 MPa | >= 2900 psi | ASTM D638 |
| Elongation at Break | >= 350 % | >= 350 % | ASTM D638 |
| Tensile Modulus | 0.670 GPa | 97.2 ksi | ISO 527-2 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 190 µm/m-°C @Temperature 20.0 °C |
106 µin/in-°F @Temperature 68.0 °F |
1 |
| Specific Heat Capacity | 1.92 J/g-°C | 0.459 BTU/lb-°F | ASTM C351 |
| Thermal Conductivity | 0.450 - 0.470 W/m-K | 3.12 - 3.26 BTU-in/hr-ft²-°F | ASTM C177 |
| Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| NSF | Yes | Yes | NSF 14; NSF 61 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Zone 1 | 150 - 200 °C | 302 - 392 °F | |
| Zone 2 | 150 - 200 °C | 302 - 392 °F | |
| Zone 3 | 150 - 200 °C | 302 - 392 °F | |
| Zone 4 | 150 - 200 °C | 302 - 392 °F | |
| Zone 5 | 150 - 200 °C | 302 - 392 °F | |
| Die Cooling Temperature | 210 °C | 410 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Agency Ratings | DVGW W270; ISO 15875 /2; ISO 9080 PE 80 | |
| ISO/DIS 12162 - MRS 8 MPa, PE80 | ||
| KTW Unspecified Rating; NSF 14; NSF 61 | ||
| Availability | Asia Pacific | |
| Europe | ||
| North America | ||
| Processing Technique | Extrusion; Pipe Extrusion |
Users viewing this material also viewed the following:
- Niche Polymer PA66GM40BK Nylon 66, 40% Mineral Fiber Filled
- Osprey Metals D2 Tool Steel Powder (Grade 95% - 16)
- Gouda Vuurvast CURAS 85 PD Moldable Refractory Material
- Inno-Comp INNOPOL® CS 3-9230 KAR YU UV-Stabilized, 26% Mineral-Filled Compound Blend Of Polypropylene Homopolymer And Block-Copolymer
- Stellarchem MP-845B TPE Compound
- Teknor Apex APEX® 157V-4 Polyvinyl Chloride, Flexible
- Teknor Apex TEKRON® 4300LM-P96-1 Thermoplastic Elastomer
- Eurofoam Evacell XM 2001 EVA + PE Foam
- Braskem F2523 LDPE Blown Film Extrusion Polyethylene
Copyright © lookpolymers.com All Rights Reserved