- HOME
- POLYMER SEARCH
- Thermoplastic
- Polysulfone (PSU)
- Polysulfone, Modified
- Solvay Specialty Polymers Mindel® S-1000 Modified Polysulfone (discontinued **)
Solvay Specialty Polymers Mindel® S-1000 Modified Polysulfone (discontinued **)
| Category | Polymer , Thermoplastic , Polysulfone (PSU) , Polysulfone, Modified |
| Manufacturer | |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Mindel® S-1000 Modified Polysulfone
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
This product line was acquired by Solvay Advanced Polymers from BP Amoco in November 2001.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.23 g/cc | 0.0444 lb/in³ | ASTM D792 |
| Water Absorption | 0.20 % | 0.20 % | in 24 hours per ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 66.0 MPa | 9570 psi | ASTM D638 |
| Elongation at Break | 100 % | 100 % | ASTM D638 |
| Elongation at Yield | 6.0 % | 6.0 % | ASTM D638 |
| Tensile Modulus | 2.41 GPa | 350 ksi | ASTM D638 |
| Flexural Yield Strength | 97.0 MPa | 14100 psi | ASTM D790 |
| Flexural Modulus | 2.63 GPa | 381 ksi | ASTM D790 |
| Izod Impact, Notched | 0.900 J/cm | 1.69 ft-lb/in | ASTM D256 |
| Tensile Impact Strength | 270 kJ/m² | 128 ft-lb/in² |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 103 µm/m-°C @Temperature 20.0 °C |
57.2 µin/in-°F @Temperature 68.0 °F |
ASTM E381 |
| CTE, linear, Transverse to Flow | 103 µm/m-°C @Temperature 20.0 °C |
57.2 µin/in-°F @Temperature 68.0 °F |
ASTM E381 |
| Deflection Temperature at 1.8 MPa (264 psi) | 149 °C | 300 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 3.30 mm |
V-0 @Thickness 0.130 in |
|
| V-0 @Thickness 3.30 mm |
V-0 @Thickness 0.130 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 3.1 @Frequency 1000 Hz |
3.1 @Frequency 1000 Hz |
ASTM D150 |
| Dielectric Strength | 20.0 kV/mm @Thickness 0.320 mm |
508 kV/in @Thickness 0.0126 in |
ASTM D149 |
| Dissipation Factor | 0.0010 @Frequency 1000 Hz |
0.0010 @Frequency 1000 Hz |
ASTM D150 |
Users viewing this material also viewed the following:
- Nye Lubricants 868H-MS (FG) Synthetic Oil
- Polykemi AB SCANMID 6 B11^ F50 Nylon 6, Glass Fiber Reinforced
- Plastcom SLOVAMID 6 T 30 TS PA6, 30% mineral filling
- 3M Dyneon™ TFM™ 1605 Modified PTFE Powder (discontinued **)
- Overview of materials for Polyphenylene Sulfide (PPS), Aramid Fiber
- MarkeTech AO 98 Aluminum Oxide Ceramic Substrate, 98% Purity
- Lucite International Elvacite ® 2016 Acrylic Resin
- Teknor Apex Chemlon® 125-15 MGH Nylon 66, 25% Mineral Reinforced, 15% Glass Fiber Reinforced
- ExxonMobil Mobil Synthetic Oven Lube 1090
- Entec Hylox® 9020 PBT, 20% Glass Reinforced
Copyright © lookpolymers.com All Rights Reserved