- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Sharadaa Ceramics REFCAST LC60ABR Low Cement Castables
Sharadaa Ceramics REFCAST LC60ABR Low Cement Castables
| Category | Ceramic , Oxide , Aluminum Oxide |
| Manufacturer | Sharadaa Ceramics |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sharadaa Ceramics REFCAST LC60ABR Low Cement Castables.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: We bring to our clients a range of Low Cement Castables, that are available in varied alumina content and service range. Designed for abrasion resistance application, these are widely used in furnaces such as ladle back up lining, sintering furnace roof and soaking pit covers.Information provided by Sharadaa Ceramics Pvt. Ltd.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | >= 2.35 g/cc | >= 0.0849 lb/in³ | Dried at 110°C |
| Grain Size | <= 10000 µm | <= 10000 µm |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Modulus of Rupture | 0.0118 GPa @Temperature 110 °C |
1.71 ksi @Temperature 230 °F |
|
| 0.0147 GPa @Temperature 1100 °C |
2.13 ksi @Temperature 2010 °F |
||
| 0.0177 GPa @Temperature 1500 °C |
2.57 ksi @Temperature 2730 °F |
||
| Compressive Strength | 88.3 MPa @Temperature 110 °C |
12800 psi @Temperature 230 °F |
Cold Crushing |
| 98.1 MPa @Temperature 1100 °C |
14200 psi @Temperature 2010 °F |
Cold Crushing | |
| 108 MPa @Temperature 1500 °C |
15600 psi @Temperature 2730 °F |
Cold Crushing | |
| 24.5 MPa @Time 86400 sec |
3560 psi @Time 24.0 hour |
Cold Crushing |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 1.05 W/m-K @Temperature 400 °C, Time 10800 sec |
7.29 BTU-in/hr-ft²-°F @Temperature 752 °F, Time 3.00 hour |
|
| 1.16 W/m-K @Temperature 600 °C, Time 10800 sec |
8.05 BTU-in/hr-ft²-°F @Temperature 1110 °F, Time 3.00 hour |
||
| 1.28 W/m-K @Temperature 800 °C, Time 10800 sec |
8.88 BTU-in/hr-ft²-°F @Temperature 1470 °F, Time 3.00 hour |
||
| Maximum Service Temperature, Air | 1600 °C | 2910 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | >= 60 % | >= 60 % | |
| Fe2O3 | <= 1.6 % | <= 1.6 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Permanent Linear Change | -0.1 - 0.1% | 800°C |
| -0.3 - 0.3% | 1100°C | |
| -1.0 -1.0% | 1500°C | |
| Refractoriness | >1804°C | |
| Thermal Expansion | 0.3 | 1000°C, Reversible |
| Water Required to Mix | 4 - 5% |
Users viewing this material also viewed the following:
- MV Labs MG200 MgBr2·6H2O Magnesium bromide hydrate
- Polimeri Europa Flexirene® FG 23 I Butene Copolymer Linear Low Density Polyethylene
- ExxonMobil LL 1002.32 Cast Film Resin (discontinued **)
- Master Bond Supreme 45HT Toughened Heat Resistant Two Component Epoxy Adhesive
- Lubrizol ESTANE® 5719 Ester Based Thermoplastic Polyurethane (European Grade)
- Entec Hylox® 9020 PBT, 20% Glass Reinforced
- Dura-Bar 201 Type 1 Continuously Cast Ni-Resist Iron Bar Stock ASTM A436
- 3M #11 Filtration Granule (Corona)
- 3M FV01462 Soft Clear Vinyl Label Products
Copyright © lookpolymers.com All Rights Reserved