- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoset Fluoroelastomer
- Seals Eastern Perflas® 9295 Perfluorinated Rubber
Seals Eastern Perflas® 9295 Perfluorinated Rubber
| Category | Polymer , Thermoset , Fluoropolymer, TS , Thermoset Fluoroelastomer , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Seals Eastern, Inc |
| Trade Name | Perflas® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Seals Eastern Perflas® 9295 Perfluorinated Rubber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Perfluoro rubber for high-temperature, aggressive chemical service. Perflas 9295® seals offer high temperature service and are resistant to aggressive chemicals. They are a thermally stable, perfluorinated elastomer (FFKM). Perflas 9295 seals offer outstanding resistance to high temperature (320°C/608°F). Perflas 9295 seals resist attack by nearly all chemical reagents, including organic and inorganic acids, alkalines, ketones, esters, alcohols, fuels and hot water. Information provided by Seals Eastern, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.13 g/cc | 2.13 g/cc | ASTM D297, 15 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 73 | 73 | |
| Tensile Strength at Break | 19.50 MPa | 2828 psi | AVG; ASTM D412 Method A |
| 19.89 MPa @Temperature 200 °C, Time 252000 sec |
2885 psi @Temperature 392 °F, Time 70.0 hour |
ASTM D865 | |
| Elongation at Break | 268 % | 268 % | AVG; ASTM D412 Method A |
| 200.9 % @Temperature 200 °C, Time 252000 sec |
200.9 % @Temperature 392 °F, Time 70.0 hour |
After Dry Heat Aging; ASTM D865 | |
| 100% Modulus | 0.007701 GPa | 1.117 ksi | |
| Compression Set | 25 % @Temperature 23.0 °C, Time 252000 sec |
25 % @Temperature 73.4 °F, Time 70.0 hour |
O-ring (-214) ASTM Method B |
| 37 % @Temperature 200 °C, Time 252000 sec |
37 % @Temperature 392 °F, Time 70.0 hour |
O-ring (-214) ASTM Method B | |
| 45 % @Temperature 230 °C, Time 252000 sec |
45 % @Temperature 446 °F, Time 70.0 hour |
O-ring (-214) ASTM Method B |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 260 °C | 500 °F | ASTM D1329 |
Users viewing this material also viewed the following:
- Lucas-Milhaupt BRAZE 650 (Easy) Silver Based Cadmium Free Filler Metal
- Styrolution Styrolux 684D SBC
- Teknor Apex APEX® 3600-90NT Polyvinyl Chloride, Flexible
- Zotefoams Plastazote® HL47 Polyethylene Foam
- Unitika UM-8430RG
- ExxonMobil LD 316.19 High Clarity, High Impact Film Resin
- Barlog Plastics KEBAFORM C 90 W POM Copolymer unreinforced, drinking water approved
- Teknor Apex Sarlink® 3490 Thermoplastic Elastomer
Copyright © lookpolymers.com All Rights Reserved