- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Seals Eastern 5353 Nitrile Rubber
Seals Eastern 5353 Nitrile Rubber
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Seals Eastern, Inc |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Seals Eastern 5353 Nitrile Rubber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
General purpose NitrileInformation provided by Seals Eastern, Inc.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | >= 61 | >= 61 | ASTM D2240, Type A |
| 70 | 70 | AVG; ASTM D2240, Type A | |
| Tensile Strength at Break | >= 12.63 MPa | >= 1832 psi | ASTM D412 Method A |
| 19.69 MPa | 2856 psi | AVG; ASTM D412 Method A | |
| Tensile Strength, Yield | >= 1.10 MPa | >= 160 psi | Stress at Elongation M50; ASTM D412 Method A |
| 1.23 MPa | 179 psi | AVG Stress at Elongation M25; ASTM D412 Method A | |
| 1.68 MPa | 244 psi | AVG Stress at Elongation M50; ASTM D412 Method A | |
| >= 1.71 MPa | >= 248 psi | Stress at Elongation M100; ASTM D412 Method A | |
| 2.94 MPa | 426 psi | AVG Stress at Elongation M100; ASTM D412 Method A | |
| Elongation at Break | >= 321 % | >= 321 % | ASTM D412 Method A |
| 424 % | 424 % | AVG; ASTM D412 Method A | |
| Modulus of Elasticity | 0.000855 GPa | 0.124 ksi | ASTM D412 Method A |
| Shear Modulus | 0.00276 GPa | 0.401 ksi | ASTM D412 Method A |
| Secant Modulus | 0.007798 GPa | 1.131 ksi | ASTM D412 Method A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Glass Transition Temp, Tg | -25.0 °C | -13.0 °F | ASTM D1329 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Strain Energy / Unit Volume at 20% Elongation (psi) | 16 |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 66 GB 30 GF 20 PA66, 20% glass fibre, 30% glass beads
- Osprey Metals 90/10 Cu Sn Powder (Grade 80% - 22)
- SABIC Innovative Plastics GELOY INP388 ASA+AMSAN
- PolyOne Edgetek® AS-30GF/000 FRVO Acrylonitrile Butadiene Styrene (ABS), Glass Filled (discontinued **)
- Polyram PlusTek PA4801G6 Nylon 6.6, 30% Glass Fiber Reinforced, PTFE lubricated
- Dow Corning 9-6346 SILANE
- Chosun Refractories SCX-30KL Special SiC Castable
- Arlon 55579R055 0.054" (1.37 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- Arlon 510-638R-50 0.008" (0.203 mm) Silicone Rubber Coated Fiberglass
- A. Schulman POLYFORT™ PP 1329 Medium Impact Copolymer Polypropylene
Copyright © lookpolymers.com All Rights Reserved