- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Uncompounded
- S&E Specialty Polymers GR-1409 PVC
S&E Specialty Polymers GR-1409 PVC
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Uncompounded |
| Manufacturer | S&E Specialty Polymers |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | S&E Specialty Polymers GR-1409 PVC.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Application: High flow, high impact rigid PVC based compound. It is suitable for injection molding of the large parts.Information provided by S&E Specialty Polymers
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.27 - 1.33 g/cc | 1.27 - 1.33 g/cc | ASTM D792 |
| Melt Flow | 7.0 g/10 min @Load 20.0 kg, Temperature 190 °C |
7.0 g/10 min @Load 44.1 lb, Temperature 374 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 85 | 85 | ASTM D2240 |
| Tensile Strength | >= 41.4 MPa | >= 6000 psi | ASTM D638 |
| Flexural Modulus | >= 2.76 GPa | >= 400 ksi | ASTM D790 |
| Izod Impact, Notched | >= 6.94 J/cm @Thickness 3.17 mm |
>= 13.0 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Falling Weight | >2 in-lb/mil | 73°F @ 0.125", ASTM D4226 |
Users viewing this material also viewed the following:
- Kennametal Stellite Nistelle 2350 Nickel Alloy
- SABIC Innovative Plastics ULTEM CRS5011 PEI
- Teknor Apex Telcar® TL-1050-80 Thermoplastic Elastomer
- Elgiloy® Co-Cr-Ni Alloy, Strip, 65% Cold Reduction
- Eurostar Staramide P1000J5 PA6, Impact Modified, Injection Molded
- Dynasol Calprene® H6110 Hydrogenated Rubber SEBS
- BP Amoco Accpro® 9961 Enhanced Polypropylene (discontinued **)
- Multibase Multibatch® MP 52577 Sheet Extrusion
Copyright © lookpolymers.com All Rights Reserved