SABIC Innovative Plastics NORYL WCA871 PPE-TPE (Asia Pacific)

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyphenylene Ether/PPO
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	Noryl
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics NORYL WCA871 PPE-TPE (Asia Pacific).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Halogen-free flame retardant Flexible Noryl extrusion grade intended for evaluation in applications such as insulation and cable jacket. Flame retardant performance and mechanical properties capable of meeting UL VW-1 requirement and 105C temperature rating as defined by UL 1581. 87 Shore A hardness. Processing typically conducted on standard extrusion equipment. UL 1581 tests conducted on 2.0 mm wire with 0.12 mm x 20 stranded copper conductor.

Physical Properties	Metric	English	Comments
Specific Gravity	1.01 g/cc	1.01 g/cc	ASTM D792
Melt Flow	7.5 g/10 min @Load 5.00 kg, Temperature 250 Â°C	7.5 g/10 min @Load 11.0 lb, Temperature 482 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	87	87	30S reading; ASTM D2240
Tensile Strength at Break	19.0 MPa	2760 psi	50 mm/min; ISO 527
	20.0 MPa	2900 psi	Type I, 50 mm/min; ASTM D638
	28.0 MPa	4060 psi	UL 1581
	30.0 MPa	4350 psi	after 7days @136Â°C; UL 1581
Elongation at Break	132 %	132 %	50 mm/min; ISO 527
	146 %	146 %	Type I, 50 mm/min; ASTM D638
	200 %	200 %	after 7days @136Â°C; UL 1581
	240 %	240 %	UL 1581
Flexural Modulus	0.110 GPa	16.0 ksi	12.5 mm/min, 100 mm span; ASTM D790
	0.110 GPa	16.0 ksi	12.5 mm/min; ISO 178
Tear Strength	7.50 kN/m	42.8 pli	ISO 6383
Heat Distortion	14 % @Load 0.250 kg, Temperature 121 Â°C	14 % @Load 0.551 lb, Temperature 250 Â°F	UL 1581

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	105 Â°C	221 Â°F	UL temperature rating; UL 1581
Brittleness Temperature	<= -40.0 Â°C	<= -40.0 Â°F	ASTM D746
Oxygen Index	24 %	24 %	ISO 4589
Glow Wire Test	725 Â°C	1340 Â°F	IEC 60695-2-13
	750 Â°C @Thickness 3.00 mm	1380 Â°F @Thickness 0.118 in	IEC 60695-2-12

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.90e+16 ohm-cm	1.90e+16 ohm-cm	ASTM D257
Dielectric Constant	2.6 @Frequency 1.00e+6 Hz	2.6 @Frequency 1.00e+6 Hz	IEC 60250
Dielectric Strength	25.0 kV/mm @Thickness 2.00 mm	635 kV/in @Thickness 0.0787 in	in oil; IEC 60243-1
Dissipation Factor	0.0068 @Frequency 1.00e+6 Hz	0.0068 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Descriptive Properties	Value	Comments
Smoke Density on 0.5mm plaque, Flame, Ds, max	102	ASTM E 662
Smoke Density on 0.5mm plaque, Non-flame, Ds, max	66	ASTM E 662
VW-1	Pass	UL 1581

Users viewing this material also viewed the following: