SABIC Innovative Plastics LNP LUBRICOMP JCL36E PES

Category	Polymer , Thermoplastic , Polyethersulfone (PES)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP LUBRICOMP
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRICOMP JCL36E PES.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LNP* LUBRICOMP* JCL36E is a compound based on Polyethersulfone (PES) resin containing 30% Carbon Fiber, 15% PTFE. Added feature of this grade is: Wear Resistant.

Physical Properties	Metric	English	Comments
Specific Gravity	1.55 g/cc	1.55 g/cc	ASTM D792
Density	1.54 g/cc	0.0556 lb/inÂ³	ASTM D792
Moisture Absorption	0.0200 %	0.0200 %	50% RH, 24 hrs; ASTM D570
	0.0400 %	0.0400 %	23Â°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.00010 - 0.00030 cm/cm @Time 86400 sec	0.00010 - 0.00030 in/in @Time 24.0 hour	ASTM D955
Linear Mold Shrinkage, Transverse	0.0040 - 0.0060 cm/cm @Time 86400 sec	0.0040 - 0.0060 in/in @Time 24.0 hour	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	142 MPa	20600 psi	Type I, 5 mm/min; ASTM D638
	145 MPa	21000 psi	5 mm/min; ISO 527
Tensile Strength, Yield	142 MPa	20600 psi	Type I, 5 mm/min; ASTM D638
	145 MPa	21000 psi	5 mm/min; ISO 527
Elongation at Break	0.50 %	0.50 %	Type I, 5 mm/min; ASTM D638
	0.50 %	0.50 %	5 mm/min; ISO 527
Elongation at Yield	0.50 %	0.50 %	Type I, 5 mm/min; ASTM D638
	0.50 %	0.50 %	5 mm/min; ISO 527
Tensile Modulus	26.32 GPa	3817 ksi	1 mm/min; ISO 527
	26.88 GPa	3899 ksi	50 mm/min; ASTM D638
Flexural Strength	198 MPa	28700 psi	1.3 mm/min, 50 mm span; ASTM D790
	213 MPa	30900 psi	ISO 178
Flexural Yield Strength	199 MPa	28900 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	22.88 GPa	3318 ksi	2 mm/min; ISO 178
	23.4 GPa	3390 ksi	1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched	0.580 J/cm	1.09 ft-lb/in	ASTM D256
Izod Impact, Unnotched	3.17 J/cm	5.94 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	6.00 kJ/mÂ²	2.86 ft-lb/inÂ²	80104; ISO 180/1A
Dart Drop, Total Energy	5.00 J @Temperature 23.0 Â°C	3.69 ft-lb @Temperature 73.4 Â°F	ASTM D3763
Coefficient of Friction, Dynamic	0.34	0.34	ASTM D3702 Modified
Coefficient of Friction, Static	0.36	0.36	ASTM D3702 Modified
K (wear) Factor	50.4 x 10^-8 mmÂ³/N-M	25.0 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	13.0 Âµm/m-Â°C @Temperature -30.0 - 30.0 Â°C	7.22 Âµin/in-Â°F @Temperature -22.0 - 86.0 Â°F	ASTM D696
CTE, linear, Transverse to Flow	27.0 Âµm/m-Â°C @Temperature -30.0 - 30.0 Â°C	15.0 Âµin/in-Â°F @Temperature -22.0 - 86.0 Â°F	ASTM D696
Deflection Temperature at 0.46 MPa (66 psi)	280 Â°C	536 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	279 Â°C @Thickness 3.20 mm	534 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	270 Â°C	518 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	270 Â°C @Thickness 3.20 mm	518 Â°F @Thickness 0.126 in	unannealed; ASTM D648

Users viewing this material also viewed the following: