Quadrant EPP Symalit® 1000 ECTFE, unfilled, lining industries (ISO Data)

Category	Polymer , Thermoplastic , Fluoropolymer , ETFE/ECTFE , Fluorocarbon ETFE/ECTFE, Molded/Extruded
Manufacturer	Quadrant Engineering Plastics Products
Trade Name	Symalit®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Quadrant EPP Symalit® 1000 ECTFE, unfilled, lining industries (ISO Data).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Symalit 1000 ECTFE is made from a fluoropolymer resin that is a copolymer of ethylene and chlorotrifluoroethylene. It exhibits good mechanical properties combined with an excellent chemical resistance. Thermal stability in the range -76 °C up to +160 °C / -105 °F up to + 356 °F Excellent chemical resistance against highly concentrated chemicals, even for a broad range of alcalines (up to pH 14) Low permeability to liquids, gases and vapors. High elongation at break Excellent impact resistance Good resistance to stress cracking, even with caustic solutions, chlorine and alkaline areas Excellent weather proof and radiation proof Low coefficient of thermal expansion

Physical Properties	Metric	English	Comments
Density	1.68 g/cc	0.0607 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	0.040 %	0.040 %	50% RH
Water Absorption at Saturation	<= 0.10 %	<= 0.10 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	94	94	ISO 2039-2
Hardness, Shore D	70	70
Ball Indentation Hardness	65.0 MPa	9430 psi	ISO 2039-1
Tensile Strength	30.0 MPa	4350 psi	at Yield; ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	ISO 527-1/-2
Elongation at Yield	4.0 %	4.0 %	ISO 527-1/-2
Tensile Modulus	1.60 GPa	232 ksi	ISO 527-1/-2
Flexural Strength	47.0 MPa	6820 psi
Compressive Strength	14.5 MPa @Strain 1 %	2100 psi @Strain 1 %	ISO 604
	26.0 MPa @Strain 2 %	3770 psi @Strain 2 %	ISO 604
	33.0 MPa @Strain 5 %	4790 psi @Strain 5 %	ISO 604
K Factor (ISO)	1100 µm/km	1100 µm/km
Charpy Impact Unnotched	NB	NB	ISO 179-1/1eU
Charpy Impact, Notched	18.0 J/cm²	85.7 ft-lb/in²	Partial Break; ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.35 - 0.45	0.35 - 0.45

Thermal Properties	Metric	English	Comments
CTE, linear	120 µm/m-°C @Temperature 23.0 - 100 °C	66.7 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.150 W/m-K	1.04 BTU-in/hr-ft²-°F
Melting Point	240 °C	464 °F	DSC, 10°C/min.; ISO 11357-1/-3
Maximum Service Temperature, Air	160 °C	320 °F	Continuous
Deflection Temperature at 1.8 MPa (264 psi)	65.0 °C	149 °F	ISO 75-1/-2
Flammability, UL94	V-0	V-0
Oxygen Index	52 %	52 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.0e+14 ohm-cm	>= 1.0e+14 ohm-cm	IEC 60093
Surface Resistivity per Square	>= 1.0e+13 ohm	>= 1.0e+13 ohm	IEC 60093
Dielectric Constant	2.5 @Frequency >=100000 Hz	2.5 @Frequency >=100000 Hz	IEC 60250
Dielectric Strength	26.0 kV/mm	660 kV/in
Dissipation Factor	0.0010 @Frequency 100000 Hz	0.0010 @Frequency 100000 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Compliance Properties	Metric	English
3A-Dairy	No	No
European Food 1935/2004	No	No
FDA	No	No
USP Class VI	No	No

Chemical Resistance Properties	Metric	English
Acids, Strong (pH 1-3)	Acceptable	Acceptable
Acids, Weak	Acceptable	Acceptable
Alcohols	Acceptable	Acceptable
Alkalies, Strong (pH 11-14)	Unacceptable	Unacceptable
Alkalies, Weak	Limited	Limited
Chlorinated Solvents	Limited	Limited
Continuous Sunlight	Limited	Limited
Hot Water / Steam	Acceptable	Acceptable
Hydrocarbons - Aliphatic	Acceptable	Acceptable
Hydrocarbons - Aromatic	Acceptable	Acceptable
Inorganic Salt Solutions	Acceptable	Acceptable
Ketones, Esters	Unacceptable	Unacceptable

Users viewing this material also viewed the following: