- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyamide-imide (PAI)
- Polyamide-Imide, Molded
- Quadrant EPP Semitron® ESd 520HR (ASTM Product Data Sheet)
Quadrant EPP Semitron® ESd 520HR (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyamide-imide (PAI) , Polyamide-Imide, Molded |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Semitron® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Semitron® ESd 520HR (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.58 g/cc | 1.58 g/cc | ASTM D792 |
| Water Absorption | 0.60 % | 0.60 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 4.6 % | 4.6 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 108 | 108 | ASTM D785 |
| Tensile Strength | 82.7 MPa | 12000 psi | ASTM D638 |
| Elongation at Break | 3.0 % | 3.0 % | ASTM D638 |
| Tensile Modulus | 5.52 GPa | 800 ksi | ASTM D638 |
| Flexural Strength | 138 MPa | 20000 psi | ASTM D790 |
| Flexural Modulus | 5.86 GPa | 850 ksi | ASTM D790 |
| Compressive Strength | 207 MPa | 30000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 4.14 GPa | 600 ksi | ASTM D695 |
| Shear Strength | 86.9 MPa | 12600 psi | ASTM D732 |
| Izod Impact, Notched | 0.427 J/cm | 0.800 ft-lb/in | ASTM D256 Type A |
| Coefficient of Friction, Dynamic | 0.24 | 0.24 | Dry vs. Steel; QTM55007 |
| K (wear) Factor | 604 x 10-8 mm³/N-M | 300 x 10-10 in³-min/ft-lb-hr | QTM 55010 |
| Limiting Pressure Velocity | 0.946 MPa-m/sec | 27000 psi-ft/min | 4:1 safety factor; QTM 55007 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 50.4 µm/m-°C @Temperature -40.0 - 149 °C |
28.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.357 W/m-K | 2.48 BTU-in/hr-ft²-°F | ASTM F433 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 271 °C | 520 °F | ASTM D648 |
| Glass Transition Temp, Tg | 275 °C | 527 °F | ASTM D3418 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | 1.00e+10 - 1.00e+12 ohm | 1.00e+10 - 1.00e+12 ohm | EOS/ESD S11.11 |
| Dielectric Constant | 5.76 @Frequency 1e+6 Hz |
5.76 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 18.7 kV/mm | 475 kV/in | Short Term; ASTM D149 |
| Dissipation Factor | 0.182 @Frequency 1e+6 Hz |
0.182 @Frequency 1e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Limited | Limited | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | Yes | Yes | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 4 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- Nye Lubricants 186 (SO) Synthetic Oil
- PolyOne Geon™ HC 2185 Polyvinyl Chloride, Flexible (PVC, Flexible)
- MetalTek WCC Cast 105-85 Alloy Steel
- Samsung Cheil Industries Starex® SG-501 Expandable Polystyrene (EPS) High Expansion
- ChevronTexaco Bright-Cut® AH Metal Working Fluid
- DuPont Performance Polymers Hytrel® HTR5612BK TPC-ET (Unverified Data**)
- Assab Steels EM38 Steel for Plastic Molds
- Fainplast Compounds PH 62 Flexible PVC, Transparent Extrusion
Copyright © lookpolymers.com All Rights Reserved