Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Quadrant EPP Ketron® CA30 PEEK, Extruded 30% Carbon Fiber Reinforced Polyetherether Ketone (ASTM Product Data Sheet)

Category Polymer , Thermoplastic , Polyketone , Polyetheretherketone (PEEK) , Polyetheretherketone, PEEK, Carbon Fiber Filled
Manufacturer Quadrant Engineering Plastics Products
Trade Name Ketron®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Quadrant EPP Ketron® CA30 PEEK, Extruded 30% Carbon Fiber Reinforced Polyetherether Ketone (ASTM Product Data Sheet).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Physical Properties Metric English Comments
Specific Gravity 1.41 g/cc
1.41 g/cc
ASTM D792
Water Absorption 0.060 %
0.060 %
Immersion, 24hr; ASTM D570(2)
Water Absorption at Saturation 0.30 %
0.30 %
Immersion; ASTM D570(2)
Mechanical Properties Metric English Comments
Hardness, Rockwell M 102
102
ASTM D785
Hardness, Shore D 93
93
ASTM D2240
Tensile Strength 131 MPa
19000 psi
ASTM D638
Elongation at Break 5.0 %
5.0 %
ASTM D638
Tensile Modulus 7.58 GPa
1100 ksi
ASTM D638
Flexural Strength 177.5 MPa
25750 psi
ASTM D790
Flexural Modulus 8.62 GPa
1250 ksi
ASTM D790
Compressive Strength 200 MPa
29000 psi
10% Def.; ASTM D695
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256 Type A
Coefficient of Friction, Dynamic 0.20
0.20
Dry vs. Steel; QTM55007
K (wear) Factor 302 x 10-8 mm³/N-M
150 x 10-10 in³-min/ft-lb-hr
QTM 55010
Limiting Pressure Velocity 0.876 MPa-m/sec
25000 psi-ft/min
4:1 safety factor; QTM 55007
Thermal Properties Metric English Comments
CTE, linear 18.0 µm/m-°C

@Temperature -40.0 - 149 °C
 10.0 µin/in-°F

@Temperature -40.0 - 300 °F
 ASTM E831
Thermal Conductivity 0.922 W/m-K
6.40 BTU-in/hr-ft²-°F
ASTM F433
Melting Point 340 °C
644 °F
Crystalline, Peak; ASTM D3418
Maximum Service Temperature, Air 250 °C
482 °F
Long Term
Deflection Temperature at 1.8 MPa (264 psi) 270 °C
518 °F
ASTM D648
Flammability, UL94 V-0
V-0
1/8 inch (Estimated Rating)
Electrical Properties Metric English Comments
Surface Resistivity per Square <= 1e+05
<= 1e+05
EOS/ESD S11.11
Dielectric Strength 1.26 kV/mm
32.0 kV/in
Short Term; ASTM D149
Compliance Properties Metric English Comments
3A-Dairy No
No
Canada AG No
No
FDA No
No
NSF No
No
USDA No
No
USP Class VI No
No
Chemical Resistance Properties Metric English Comments
Acids, Strong (pH 1-3) Limited
Limited
Acids, Weak Acceptable
Acceptable
Alcohols Acceptable
Acceptable
Alkalies, Strong (pH 11-14) Acceptable
Acceptable
Alkalies, Weak Acceptable
Acceptable
Chlorinated Solvents Acceptable
Acceptable
Conductive / Static Dissipative Yes
Yes
Continuous Sunlight Acceptable
Acceptable
Hot Water / Steam Acceptable
Acceptable
Hydrocarbons - Aliphatic Acceptable
Acceptable
Hydrocarbons - Aromatic Acceptable
Acceptable
Inorganic Salt Solutions Acceptable
Acceptable
Ketones, Esters Acceptable
Acceptable
Descriptive Properties Value Comments
Color Natural
Machinability 7
1-10, 1=Easier to Machine
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved