Quadrant EPP Fluorosint® 207 PTFE + mica, compression moulded (ISO Data)

Category	Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Mica Filled
Manufacturer	Quadrant Engineering Plastics Products
Trade Name	Fluorosint®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Quadrant EPP Fluorosint® 207 PTFE + mica, compression moulded (ISO Data).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

This material has a food contact compliant composition which, in combination with the good mechanical performance, dimensional stability, sliding and wear properties and inherent outstanding chemical and hydrolysis resistance of Fluorosint, opens numerous application possibilities in food, pharmaceutical and chemical processing industries High maximum allowable service temperature in air (260°C continuously) Excellent chemical and hydrolysis resistance Outstanding UV- and weather resistance Physiologically inert (suitable for food contact, except Fluorosint 500, Fluorosint MT-01) Inherent low flammability Good electrical insulating properties

Physical Properties	Metric	English	Comments
Density	2.30 g/cc	0.0831 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	<= 0.10 %	<= 0.10 %	50% RH
Water Absorption at Saturation	1.0 - 2.0 %	1.0 - 2.0 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	50	50	ISO 2039-2
Hardness, Shore D	60	60
Ball Indentation Hardness	40.0 MPa	5800 psi	ISO 2039-1
Tensile Strength	10.0 MPa	1450 psi	at Yield; ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	ISO 527-1/-2
Elongation at Yield	4.0 %	4.0 %	ISO 527-1/-2
Tensile Modulus	1.45 GPa	210 ksi	ISO 527-1/-2
Flexural Strength	14.0 MPa	2030 psi
Compressive Strength	10.5 MPa @Strain 1 %	1520 psi @Strain 1 %	ISO 604
	15.0 MPa @Strain 2 %	2180 psi @Strain 2 %	ISO 604
	20.0 MPa @Strain 5 %	2900 psi @Strain 5 %	ISO 604
K Factor (ISO)	5.0 µm/km	5.0 µm/km
Charpy Impact Unnotched	3.00 J/cm²	14.3 ft-lb/in²	ISO 179-1/1eU
Charpy Impact, Notched	0.750 J/cm²	3.57 ft-lb/in²	ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.15 - 0.25	0.15 - 0.25
Limiting Pressure Velocity	0.250 MPa-m/sec	7140 psi-ft/min	at 1 m/s unlubricated
	0.400 MPa-m/sec	11400 psi-ft/min	at 0.1 m/s unlubricated

Thermal Properties	Metric	English	Comments
CTE, linear	85.0 µm/m-°C @Temperature 23.0 - 100 °C	47.2 µin/in-°F @Temperature 73.4 - 212 °F
Melting Point	327 °C	621 °F	DSC, 10°C/min.; ISO 11357-1/-3
Maximum Service Temperature, Air	260 °C	500 °F	Continuous
Deflection Temperature at 1.8 MPa (264 psi)	100 °C	212 °F	ISO 75-1/-2
Flammability, UL94	V-0	V-0
Oxygen Index	>= 95 %	>= 95 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.0e+13 ohm-cm	>= 1.0e+13 ohm-cm	IEC 60093
Surface Resistivity per Square	>= 1.0e+13 ohm	>= 1.0e+13 ohm	IEC 60093
Dielectric Strength	8.00 kV/mm	203 kV/in

Compliance Properties	Metric	English
3A-Dairy	No	No
European Food 1935/2004	No	No
FDA	Yes	Yes
USP Class VI	No	No

Chemical Resistance Properties	Metric	English
Acids, Strong (pH 1-3)	Acceptable	Acceptable
Acids, Weak	Acceptable	Acceptable
Alcohols	Acceptable	Acceptable
Alkalies, Strong (pH 11-14)	Unacceptable	Unacceptable
Alkalies, Weak	Acceptable	Acceptable
Chlorinated Solvents	Acceptable	Acceptable
Continuous Sunlight	Acceptable	Acceptable
Hot Water / Steam	Limited	Limited
Hydrocarbons - Aliphatic	Acceptable	Acceptable
Hydrocarbons - Aromatic	Acceptable	Acceptable
Inorganic Salt Solutions	Acceptable	Acceptable
Ketones, Esters	Acceptable	Acceptable

Users viewing this material also viewed the following: