- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyetherimide (PEI)
- Polyetherimide (PEI), Extrusion Grade
- Quadrant EPP Duratron® PEI U1000 Extruded Unfilled Polyetherimide (ASTM Product Data Sheet)
Quadrant EPP Duratron® PEI U1000 Extruded Unfilled Polyetherimide (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyetherimide (PEI) , Polyetherimide (PEI), Extrusion Grade |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Duratron® PEI |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Duratron® PEI U1000 Extruded Unfilled Polyetherimide (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.28 g/cc | 1.28 g/cc | ASTM D792 |
| Water Absorption | 0.25 % | 0.25 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 1.25 % | 1.25 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 112 | 112 | ASTM D785 |
| Hardness, Rockwell R | 125 | 125 | ASTM D785 |
| Hardness, Shore D | 86 | 86 | ASTM D2240 |
| Tensile Strength | 117 MPa | 17000 psi | ASTM D638 |
| Elongation at Break | 60 % | 60 % | ASTM D638 |
| Tensile Modulus | 3.45 GPa | 500 ksi | ASTM D638 |
| Flexural Strength | 138 MPa | 20000 psi | ASTM D790 |
| Flexural Modulus | 3.45 GPa | 500 ksi | ASTM D790 |
| Compressive Strength | 152 MPa | 22000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 3.31 GPa | 480 ksi | ASTM D695 |
| Shear Strength | 103 MPa | 15000 psi | ASTM D732 |
| Izod Impact, Notched | 0.267 J/cm | 0.500 ft-lb/in | ASTM D256 Type A |
| Coefficient of Friction, Dynamic | 0.42 | 0.42 | Dry vs. Steel; QTM55007 |
| K (wear) Factor | 5840 x 10-8 mm³/N-M | 2900 x 10-10 in³-min/ft-lb-hr | QTM 55010 |
| Limiting Pressure Velocity | 0.06568 MPa-m/sec | 1875 psi-ft/min | 4:1 safety factor; QTM 55007 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 55.8 µm/m-°C @Temperature -40.0 - 149 °C |
31.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.177 W/m-K | 1.23 BTU-in/hr-ft²-°F | ASTM F433 |
| Maximum Service Temperature, Air | 171 °C | 340 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 400 °F | ASTM D648 |
| Glass Transition Temp, Tg | 210 °C | 410 °F | ASTM D3418 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | EOS/ESD S11.11 |
| Dielectric Constant | 3.15 @Frequency 1e+6 Hz |
3.15 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 32.7 kV/mm | 830 kV/in | Short Term; ASTM D149 |
| Dissipation Factor | 0.0013 @Frequency 1e+6 Hz |
0.0013 @Frequency 1e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | Yes | Yes | Black Only |
| FDA | Yes | Yes | |
| NSF | Yes | Yes | STD 51, Natural Only |
| USDA | Yes | Yes | |
| USP Class VI | Yes | Yes |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Unacceptable | Unacceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Unacceptable | Unacceptable | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Acceptable | Acceptable | |
| Hydrocarbons - Aliphatic | Limited | Limited | |
| Hydrocarbons - Aromatic | Unacceptable | Unacceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Unacceptable | Unacceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Natural and black | |
| Machinability | 3 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® PPC4704 PPC (Asia Pacific)
- Magyar Aluminum Zeolite
- Kuraray SEPTON® S2007 Thermoplastic Rubber
- Lucite International Diakon® Frost 902 51 Acrylic Polymer
- Multibase Multibatch® MP 52214 Injection Molding
- SABIC Innovative Plastics LNP Stat-kon DCL33 PC (Europe-Africa-Middle East)
- Silberline EternaBrite® 601-PA
- Trelleborg E935 EPDM Rubber
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 20 PHR Non-Black, Translink 555
Copyright © lookpolymers.com All Rights Reserved