- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyamide-imide (PAI)
- Polyamide-Imide, Extruded
- Quadrant EPP Duratron® PAI T4203 Extruded Polyamide-imide (ASTM Product Data Sheet)
Quadrant EPP Duratron® PAI T4203 Extruded Polyamide-imide (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyamide-imide (PAI) , Polyamide-Imide, Extruded |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Duratron® PAI |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Duratron® PAI T4203 Extruded Polyamide-imide (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.41 g/cc | 1.41 g/cc | ASTM D792 |
| Water Absorption | 0.40 % | 0.40 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 1.7 % | 1.7 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell E | 80 | 80 | ASTM D785 |
| Hardness, Rockwell M | 120 | 120 | ASTM D785 |
| Tensile Strength | 138 MPa | 20000 psi | ASTM D638 |
| Elongation at Break | 10 % | 10 % | ASTM D638 |
| Tensile Modulus | 4.14 GPa | 600 ksi | ASTM D638 |
| Flexural Strength | 165 MPa | 24000 psi | ASTM D790 |
| Flexural Modulus | 4.14 GPa | 600 ksi | ASTM D790 |
| Compressive Strength | 165 MPa | 24000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 3.30 GPa | 478 ksi | ASTM D695 |
| Shear Strength | 110 MPa | 16000 psi | ASTM D732 |
| Izod Impact, Notched | 1.07 J/cm | 2.00 ft-lb/in | ASTM D256 Type A |
| Coefficient of Friction, Dynamic | 0.35 | 0.35 | Dry vs. Steel; QTM55007 |
| K (wear) Factor | 70.5 x 10-8 mm³/N-M | 35.0 x 10-10 in³-min/ft-lb-hr | With post-machine cure cycle; QTM 55010 |
| Limiting Pressure Velocity | 0.420 MPa-m/sec | 12000 psi-ft/min | 4:1 safety factor; QTM 55010 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 30.6 µm/m-°C @Temperature -40.0 - 149 °C |
17.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.259 W/m-K | 1.80 BTU-in/hr-ft²-°F | ASTM F433 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 278 °C | 532 °F | ASTM D648 |
| Glass Transition Temp, Tg | 275 °C | 527 °F | ASTM D3418 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1.00e+16 ohm | >= 1.00e+16 ohm | EOS/ESD S11.11 |
| Dielectric Constant | 4.2 @Frequency 1e+6 Hz |
4.2 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 22.8 kV/mm | 580 kV/in | Short Term; ASTM D149 |
| Dissipation Factor | 0.026 @Frequency 1e+6 Hz |
0.026 @Frequency 1e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Limited | Limited | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 5 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- Nylene® 609 Nylon 6, 50% RH, Film/Extrusion Grade
- RheTech Products T20P100-00UV 20% Talc Reinforced Polypropylene, UV Stabilized, Natural
- Premix Premi-Glas® 3200-25 Fiberglass Reinforced SMC
- Multibase Multi-Flex® A 4541 Clear TPE Thermoplastic Elastomer
- ExxonMobil SBA Secondary Butyl Alcohol
- Beijing Ranger Chem BLUESTAR® BS450 Acetal Copolymer
- 3M Weatherban™ PF5422 Ribbon Sealant
- Arkema Group OREVAC® PPC Grafted Maleic Anhydride Polypropylene
- Solvay RHODASURF® BC-630 Surfactant
Copyright © lookpolymers.com All Rights Reserved