- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 12
- PolyOne Therma-Tech™ NJC-7500 Nylon 12 (discontinued **)
PolyOne Therma-Tech™ NJC-7500 Nylon 12 (discontinued **)
| Category | Polymer , Thermoplastic , Nylon , Nylon 12 |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Therma-Tech™ NJC-7500 Nylon 12
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
PolyOne First ChoiceInformation provided by PolyOne Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.677 g/cc | 1.677 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 39.61 MPa | 5745 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Elongation at Break | 0.4272 % | 0.4272 % | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Tensile Modulus | 14.50 GPa | 2103 ksi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Flexural Strength | 68.83 MPa | 9983 psi | ASTM D790 |
| Flexural Modulus | 11.42 GPa | 1656 ksi | ASTM D790 |
| Izod Impact, Notched | 0.184 J/cm @Thickness 3.17 mm, Temperature 23.0 °C |
0.345 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Method A, Injection Molded; ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | >= 25.00 W/m-K | >= 173.5 BTU-in/hr-ft²-°F | ASTM C177 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | 49000 ohm | 49000 ohm | ASTM D257 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Product Form | Pellets |
Users viewing this material also viewed the following:
- PolyOne OnFlex™ S EH 40A-3S7001 Thermoplastic Elastomer (TPE)
- Quadrant EPP TIVAR® 1000 Virgin (Natural & Color except Black) UHMW-PE
- Chevron Phillips MarFlex® ER3344 Polyethylene; Masterbatch (discontinued **)
- LyondellBasell Petrothene® GA594189 Linear Low Density Polyethylene, Injection Molding Grade
- SABIC Innovative Plastics ULTEM AR9100 PEI (Asia Pacific)
- Teknor Apex Telcar® TL-2585F Thermoplastic Elastomer
- DuPont™ Appeel® 20D855 Ethylene Acrylate
- Abatron AboCast 8012-9/AboCure 8012-9 Epoxy
- BASF Ultramid® A3WG3 15% Glass Filled PA66 (Dry)
- BASF Ultramid® A3K Q601 PA66(Dry)
Copyright © lookpolymers.com All Rights Reserved