PolyOne OnFlex™ S EH 70A-3S7004 Thermoplastic Elastomer (TPE)

Category	Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	PolyOne Corporation
Trade Name	OnFlex™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne OnFlex™ S EH 70A-3S7004 Thermoplastic Elastomer (TPE).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

OnFlex™-S EH thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver a great cost/performance ratio in addition to typical OnFlex™-S properties such as a wide hardness range, good mechanical properties, good processability, good colourability and a wide temperature operating range. OnFlex™-S EH compounds are filled, and are therefore opaque and have a moderately high density.Properties are measured using injection molded plaques.Information provided by PolyOne

Physical Properties	Metric	English	Comments
Density	1.20 g/cc	0.0434 lb/in³	ISO 1183

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	70	70	ISO 868
Tensile Strength at Break	5.00 MPa	725 psi	ISO 37
Tensile Stress	2.40 MPa @Strain 100 %	348 psi @Strain 100 %	ISO 37
	3.20 MPa @Strain 300 %	464 psi @Strain 300 %	ISO 37
Elongation at Break	550 %	550 %	ISO 37
Tear Strength	26.0 kN/m	148 pli	ISO 34-1
Compression Set	29 % @Temperature 23.0 °C, Time 259000 sec	29 % @Temperature 73.4 °F, Time 72.0 hour	ISO 815
	50 % @Temperature 70.0 °C, Time 79200 sec	50 % @Temperature 158 °F, Time 22.0 hour	ISO 815
	78 % @Temperature 100 °C, Time 79200 sec	78 % @Temperature 212 °F, Time 22.0 hour	ISO 815

Processing Properties	Metric	English	Comments
Melt Temperature	180 - 220 °C	356 - 428 °F
Mold Temperature	30.0 - 60.0 °C	86.0 - 140 °F

Descriptive Properties	Value	Comments
Features	General Purpose
Fogging	1.2 mg	DIN 75201B; 100°C
Forms	Pellets
Generic Material	TPE
Generic Material Type	Styrenic Thermoplastic Elastomer (TES)
Generic Name	Thermoplastic Elastomer (TPE)
Injection Rate	Fast
Manufacturer / Supplier	GLS Thermoplastic Elastomers
Odor rating	2.4	VDA 270
Processing Method	Injection Molding
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
RoHS Compliance	RoHS Compliant
Uses	Appliances
	Automotive Applications
	Consumer Applications
	General Purpose
	Industrial Applications

Users viewing this material also viewed the following: