- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethersulfone (PES)
- PolyOne Lubri-Tech™ ES-000/15T Polyethersulfone, PTFE Lubricated (discontinued **)
PolyOne Lubri-Tech™ ES-000/15T Polyethersulfone, PTFE Lubricated (discontinued **)
| Category | Polymer , Thermoplastic , Polyethersulfone (PES) |
| Manufacturer | |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Lubri-Tech™ ES-000/15T Polyethersulfone, PTFE Lubricated
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description/Features:PTFE LubricatedInformation provided by PolyOne Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.44 g/cc | 1.44 g/cc | ASTM D792 |
| Water Absorption | 0.40 % @Thickness 3.17 mm |
0.40 % @Thickness 0.125 in |
24 hr. Immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0060 - 0.0070 cm/cm | 0.0060 - 0.0070 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 65.5 MPa | 9500 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Elongation at Break | 5.0 % | 5.0 % | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Tensile Modulus | 2.55 GPa | 370 ksi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Izod Impact, Notched | 0.587 J/cm @Thickness 6.35 mm, Temperature 23.0 °C |
1.10 ft-lb/in @Thickness 0.250 in, Temperature 73.4 °F |
Method A, Injection Molded; ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 202 °C | 395 °F | Unannealed, 0.125 in bars; ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+17 ohm-cm | 1.00e+17 ohm-cm | ASTM D257 |
Users viewing this material also viewed the following:
- Lord Adhesives 7545C Two-Component, Equal-Mix, Non-Sag Urethane Adhesive
- Lucas-Milhaupt BRAZE 999 Commercial Grade Fine Silver
- LyondellBasell DP 0110M Polybutene
- Wellman Wellpet® PR118-N2 Unfilled Polyester PET
- Hexcel® AS4C Carbon Fiber (12,000 Filaments)
- DSM Biomedical Elasthane™ 55D Thermoplastic Polyether Polyurethane (TPU)
- Amity Thermosets ATM 144 Phenolic Molding Organic Filler, Compression Molded
- ATI Allegheny Ludlum Stainless Steel Chromium-Nickel Type 302, 20% Cold Rolled (UNS S30200)
- Abatron AboCast 8503-10/AboCure 8503-10 5-Minute Epoxy
- DuPont Performance Polymers Zytel® EFE7374 BK416 Nylon 6 (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved