PolyOne Geon™ Specialty Suspension Atlas E 43 Polyvinyl Chloride Homopolymer (PVC Homopolymer)

Geon® Atlas E 43 is a non-chain modified ultra-high molecular weight homopolymer specialty suspension resin intended for use in high strength extruded parts. It improves the physical properties, for instance compression, tensile and flexural strength performance. The high porosity property of this resin allows rapid plasticizer absorption in highly plasticized compounds providing low compound cycle times and resulting in high compound throughput and low manufacturing cost. Geon® Atlas E 43 improves heat distortion (HDT) performance, increases the strength for highly plasticized formulas, and provides longer product shelf life.Note: The value set forth represent 'typical' values and PolyOne Corporation, therefore, makes no representation that the material in any particular shipment will conform to the listed properties. Packaging: This resin is shipped in multi-wall paper bags, netweight 50lbs, 2,500lbs per pallet. Information shown on the package includes commercial identification number, lot, and weight. STP 488 (formulation): 100phr Geon® Atlas E 43, 55phr TOTM, and 18phr Filler ASTM D638 (formulation): 100phr Geon® Atlas E 43, 60phr DINP, 5phr ESO, and 2phr Mark 4716Information provided by PolyOne