- HOME
- POLYMER SEARCH
- Thermoplastic
- Polysulfone (PSU)
- PolyOne Edgetek® MLS-XC195C-2 Polysulfone Alloy - ESD Material - Lubricated (discontinued **)
PolyOne Edgetek® MLS-XC195C-2 Polysulfone Alloy - ESD Material - Lubricated (discontinued **)
| Category | Polymer , Thermoplastic , Polysulfone (PSU) |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Edgetek® MLS-XC195C-2 Polysulfone Alloy - ESD Material - Lubricated
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data provided by PolyOne.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.29 g/cc | 1.29 g/cc | ASTM D792 |
| Water Absorption | 0.20 % @Thickness 3.17 mm |
0.20 % @Thickness 0.125 in |
24 hr. Immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0020 - 0.0030 cm/cm | 0.0020 - 0.0030 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 107 MPa | 15500 psi | Type 1 - Rigids, Yield, 0.2 in/min; ASTM D638 |
| Elongation at Break | 3.0 - 4.0 % | 3.0 - 4.0 % | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Tensile Modulus | 6.21 GPa | 900 ksi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Flexural Strength | 124 MPa | 18000 psi | ASTM D790 |
| Flexural Modulus | 6.21 GPa | 900 ksi | ASTM D790 |
| Izod Impact, Notched | 0.801 J/cm @Thickness 6.35 mm, Temperature 23.0 °C |
1.50 ft-lb/in @Thickness 0.250 in, Temperature 73.4 °F |
Method A, Injection Molded; ASTM D256 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 10000 ohm-cm - 1e+05 | 10000 ohm-cm - 1e+05 | ASTM D257 |
| Surface Resistivity per Square | 1e+05 - 1.00e+7 ohm | 1e+05 - 1.00e+7 ohm | ASTM D257 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 332 - 349 °C | 630 - 660 °F | Molding |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 66 GF 15 GB 25 TS PA66, 15% glass fibre, 25% glass beads
- Ineos ABS Centrex® 821 ASA Blend (discontinued **)
- SABIC Innovative Plastics LNP Stat-kon ZE004 MODIFIED POYPHENYLENE
- DuPont Vamac® GLS Sample Compound Vulcanizate Slab Cured
- Tra-Con Tra-Bond 77-2LTC Low Temperature Cure SMD Adhesive
- Dow Fulcrum™ Thermoplastic Glass-Filled Polyurethane Composite Strip
- Elastocon TPE Technologies Elastocon® CLR40 Thermoplastic Elastomer
Copyright © lookpolymers.com All Rights Reserved