POLYMER SEARCH

Polikim EFALON® T-100 Virgin PTFE

Category	Polymer , Thermoplastic , Fluoropolymer , PTFE
Manufacturer	Polikim Polimer ve Kimya Sanay
Trade Name	EFALON®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polikim EFALON® T-100 Virgin PTFE.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Applications: Gaskets, seals, O-rings, V-Rings, compression packings and similar sealing parts, Bushes, bearings and piston rings, Electrical insulators, Sliding supports, Conveyor belts, Coated tubes, valves and joint components for transfer of corrosive material, Non-stick surface applications, PTFE coated glass fabric manufacturing, Laboratory equipment that requires chemical resistance. In military units and marine industry due to resistance to water, humidity, micro-organisms and sunlight.Information provided by Polikim Polimer.

Physical Properties	Metric	English	Comments
Density	2.10 - 2.20 g/cc	0.0759 - 0.0795 lb/in³	ASTM D792
Deformation	7.5 - 8.5 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa	7.5 - 8.5 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi	permanent; ASTM D621
	14 - 16.8 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa	14 - 16.8 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi	total; ASTM D621

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	54 - 60	54 - 60	ASTM D2240
Tensile Strength, Ultimate	13.7 - 37.3 MPa	1990 - 5400 psi	ASTM D638
Elongation at Break	200 - 400 %	200 - 400 %	ASTM D638
Compressive Strength	4.41 - 4.90 MPa	640 - 711 psi	1% Deformation; ASTM D695
Izod Impact, Notched (ISO)	15.5 - 16.5 kJ/m²	7.38 - 7.85 ft-lb/in²	ASTM D256
Coefficient of Friction	0.060	0.060
Coefficient of Friction, Static	0.040	0.040
Limiting Pressure Velocity	0.000376 - 0.000409 MPa-m/sec	10.7 - 11.7 psi-ft/min	3 m/min
	0.000605 - 0.000654 MPa-m/sec	17.3 - 18.7 psi-ft/min	30 m/min
	0.0008502 - 0.0009156 MPa-m/sec	24.27 - 26.14 psi-ft/min	300 m/min

Thermal Properties	Metric	English	Comments
CTE, linear	125 - 160 µm/m-°C @Temperature 25.0 - 100 °C	69.4 - 88.9 µin/in-°F @Temperature 77.0 - 212 °F	ASTM D696
	150 - 190 µm/m-°C @Temperature 25.0 - 200 °C	83.3 - 106 µin/in-°F @Temperature 77.0 - 392 °F	ASTM D696
	215 - 250 µm/m-°C @Temperature 25.0 - 300 °C	119 - 139 µin/in-°F @Temperature 77.0 - 572 °F	ASTM D696
Specific Heat Capacity	0.962 - 1.05 J/g-°C	0.230 - 0.251 BTU/lb-°F
Thermal Conductivity	0.230 - 0.251 W/m-K	1.59 - 1.74 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air	270 °C	518 °F	continuous
Minimum Service Temperature, Air	-260 °C	-436 °F

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+18 ohm-cm	>= 1.00e+18 ohm-cm	ASTM D257
Surface Resistance	>= 1.00e+16 ohm	>= 1.00e+16 ohm	50% rel. humidity; ASTM D257
Dielectric Constant	2.0 - 2.1 @Frequency 50.0 - 1.00e+7 Hz	2.0 - 2.1 @Frequency 50.0 - 1.00e+7 Hz	ASTM D150
Dielectric Strength	40.0 - 80.0 kV/mm @Thickness 0.100 mm	1020 - 2030 kV/in @Thickness 0.00394 in	short term; ASTM D149
Dielectric Loss Index	0.000050 @Frequency 50.0 Hz	0.000050 @Frequency 50.0 Hz	dry

Users viewing this material also viewed the following: