Category | Polymer , Thermoset , Phenolic , Phenolic/Rubber; Molded |
Manufacturer | Plenco (Plastics Engineering Company) |
Trade Name | |
Port | Shanghai port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Plenco 7487 Phenolic, Granular, Transfer Molded.pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Bulk Density | 0.550 g/cc | 0.0199 lb/in³ | ASTM D1895 |
Density | 1.34 g/cc | 0.0484 lb/in³ | ASTM D792 |
Water Absorption | 0.92 % | 0.92 % | ASTM D570 |
Linear Mold Shrinkage | 0.0079 cm/cm | 0.0079 in/in | ASTM D955 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Hardness, Rockwell E | 76 | 76 | ASTM D785 |
Tensile Strength, Ultimate | 34.0 MPa | 4930 psi | ASTM D638 |
Elongation at Break | 1.47 % | 1.47 % | ASTM D638 |
Tensile Modulus | 4.50 GPa | 653 ksi | ASTM D638 |
Flexural Strength | 56.0 MPa | 8120 psi | ASTM D790 |
Flexural Modulus | 3.60 GPa | 522 ksi | ASTM D790 |
Compressive Strength | 82.0 MPa | 11900 psi | ASTM D695 |
Izod Impact, Notched | 0.233 J/cm | 0.437 ft-lb/in | ASTM D256 |
Charpy Impact, Notched | 0.281 J/cm² | 1.34 ft-lb/in² | ASTM D256 |
Impact | 262 | 262 | J/m Drop Ball Impact; PLENCO |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 217 °C | 423 °F | Heat Resistance; ASTM D570D |
Deflection Temperature at 1.8 MPa (264 psi) | 136 °C | 277 °F | ASTM D648 |
Oxygen Index | 24.6 % | 24.6 % | ASTM D2863 |
Shrinkage | 0.39 % | 0.39 % | 72 hr, 120ºC; ASTM D1299 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 2.00e+11 ohm-cm | 2.00e+11 ohm-cm | ASTM D247 |
Dielectric Constant | 4.5 | 4.5 | ASTM D150 |
Dielectric Strength | 11.5 kV/mm | 292 kV/in | Short Time; ASTM D149 |
Dissipation Factor | 0.081 | 0.081 | ASTM D150 |
Arc Resistance | 67 sec | 67 sec | ASTM D495 |
Comparative Tracking Index | 150 V | 150 V | ASTM D3638 |