Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone |
Manufacturer | Parker Chomerics |
Trade Name | CHO-SEAL |
Port | Ningbo port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Parker Chomerics CHO-SEAL 1224 Conductive Elastomer.pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 3.05 - 3.95 g/cc | 3.05 - 3.95 g/cc | ASTM D792 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Hardness, Shore A | 58 - 72 | 58 - 72 | ASTM D2240 |
Tensile Strength at Break | >= 2.07 MPa | >= 300 psi | ASTM D412 |
Elongation at Break | 200 - 500 % | 200 - 500 % | ASTM D412 |
Tear Strength | 8.75 kN/m | 49.9 pli | ASTM D624 |
Compression Set | 45 % @Temperature 100 °C, Time 252000 sec |
45 % @Temperature 212 °F, Time 70.0 hour |
ASTM D395, Method B |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Thermal Conductivity | 2.80 W/m-K @Pressure 2.07 MPa |
19.4 BTU-in/hr-ft²-°F @Pressure 300 psi |
ASTM D5470 |
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Minimum Service Temperature, Air | -65.0 °C | -85.0 °F | Flex TR10; ASTM D1329 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 0.0020 ohm-cm | 0.0020 ohm-cm | as supplied without pressure sensitive adhesive; MIL-DTL-83528 |
0.010 ohm-cm | 0.010 ohm-cm | Post Tensile Set; MIL-DTL-83528 Para.4.6.9 | |
Shielding Effectiveness | >= 70 dB @Frequency 200000 Hz |
>= 70 dB @Frequency 200000 Hz |
H Field; MIL-DTL-83528 Para.4.6.12 |
>= 120 dB @Frequency 1.00e+8 Hz |
>= 120 dB @Frequency 1.00e+8 Hz |
E Field; MIL-DTL-83528 Para.4.6.12 | |
>= 120 dB @Frequency 5.00e+8 Hz |
>= 120 dB @Frequency 5.00e+8 Hz |
E Field; MIL-DTL-83528 Para.4.6.12 | |
>= 120 dB @Frequency 2.00e+9 Hz |
>= 120 dB @Frequency 2.00e+9 Hz |
Plane Wave; MIL-DTL-83528 Para.4.6.12 | |
>= 120 dB @Frequency 1.00e+7 Hz |
>= 120 dB @Frequency 1.00e+7 Hz |
Plane Wave; MIL-DTL-83528 Para.4.6.12 |
Descriptive Properties | Value | Comments |
---|---|---|
Binder | Silicone | |
EMP Survivability | >0.9 kA / in | MIL-DTL-83528 Para.4.6.16 |
Filler | Ag | |
Heat Aging | <0.01ohm-cm | MIL-DTL-83528 Para.4.6.15 |
Type | E | MIL-DTL-83528 |
Vibration Resistance, After | <0.002 ohm-cm | MIL-DTL-83528 Para.4.6.13 |
Vibration Resistance, During | <0.01 ohm-cm | MIL-DTL-83528 Para.4.6.13 |